This would have been a 5 star review for the 5.8ft Steel Bin storage lockable garden storage shed but for 2 reason. The first is the shear number of screws required to put this storage unit together. Somewhere around 240**. Most have to be screwed in by hand as the metal is very thin so using an electric screw driver could result in a lot of stripped thread holes. Second is the drawings for each stage. The details can be hard to see resulting in me putting the rear brace bar in the wrong way up. A problem I only discovered when trying to attach the top. This problem was compounded by the top hinges being the wrong way around in the drawing and when installed as per the drawing the top does not lock. After a tinker and turning the hinges around I got the top in the correct position and top now locks. ** I said earlier on that you are looking at screwing in 240 screws by hand. With the removal and refitting of various parts you could be looking at 300 screws by hand. This can result in sore hands and sore joints. Final note added after the first rain. The top has no vent holes at the bottom to let the rain out so be prepared to spend some and additional time and money drilling a few holes sealing the inside of the top. Once completed and the added bits done the storage unit does what I wanted it to so I am happy with it overall.