I have a 2021 JD 3032. Ordered the Titan stump bucket as it was advertised to fit my FEL JD quick attach system. Not so. The pin spacing was off a good amount. I had to use a side grinder to remove at least 1/8” of metal from the inside of both pins. After an hour of grinding and shaping the bottom pins on the stump bucket finally went in enough to insert the hitch pins. I have had this problem with no other attachment made for my JD attachment system. Titan engineers need to verify what their fabricators are doing. The bucket is sturdily built as advertised. May be hard to remove because of tight fit.