This motorcycle carrier seems to be a solid carrier but it has some issues that need to be addressed before it should be rated over three stars. The hole in the receiver that the hitch pin goes in isn’t a standard size hole. It is an oversized hole and the hitch pin is matched to fit that whole. So a standard receiver hitch hole is too small to fit this oversize pin that they send with it. So you use your normal size hitch pin, but you have an oversize hole on this carrier, allowing for quite a bit of slop for the receiver to move around. They send along a receiver type clamp that is supposed to help it from swaying, but it did not work on my receiver, and I have seen other comments where it did not work for those people either. I hauled a small motorcycle about 10 miles and the clamp had already loosened up and the carrier was tilting back-and-forth in that short distance. Titan manufacturing, you need to address this problem with the hole size and the hitch pin size and also come up with a better anti-tilt bracket. Then I would change this to a five star rating because the carrier itself does seem pretty solid.