An Oxygen Flow Meter with Duotight 8mm fittings - 0.1-1.5L/min. This flow control device is designed to be used with an oxygen cylinder and regulator that can be purchased separately.
Instructions Attach the regulator to to the top of your oxygen cylinder. Turn pressure up to 1-10psi. Immerse diffusion stone in wort for 1-2 minutes. Then dial the flow meter up to 1.0L/min. The time it takes to saturate will depend on volume, temperature, depth of vessel, and type of stone (0.5mm recommended). NOTE: Wort must be cold. It is extremely difficult to get oxygen to dissolve into hot wort so it's essential to cool wort completely before starting this process.
Type: Pure Oxygen Air Flow Meter Thread type: MFL Connector Pieces: FFL x 8mm Duotight push fit Body material: PMMA Pressure: 0.1Mpa Accuracy: 0.5% Temperature: 0-60C Float material: Agate ball O-ring material: Silicone Height: 93mm Width: 22mm Measure range: 0.1-1.5L
From: Kegland
About Brewshop:
Brewshop - online home brew beer supplies.
We provide home brewers and craft breweries with the ingredients and equipment needed to make the best beer possible.
We offer malts, hops, yeast, beer kits, kegging and dispensing products and stainless fermenters and equipment of all sizes from brands like Krome Dispense, Kegland, and Ss Brewtech.
Phone:
79294547
Email:
sales@brewshop.co.nz
Location:
PO Box 998,
Hamilton
Waikato
3240
