The Mueller Streamline® Mini Split Line Set (MPN: 612205350C) delivers a 35-foot pre-cut run of C12200 phosphorus-deoxidized copper tubing - a 3/8" liquid line paired with a 3/4" suction line - wrapped in 1/2"-wall black elastomeric insulation and sealed with plain ends ready for field flaring. Built to ASTM B1003 and UL Recognized to 700 PSI, this USA-made refrigerant line set gives licensed HVAC contractors a precision-engineered connection pathway between the outdoor condenser and indoor air handler on ductless mini split systems. How the 612205350C's C12200 Copper Alloy Construction Sets the Foundation for Reliable Refrigerant Flow The 3/8" liquid line and 3/4" suction line in MPN 612205350C are drawn from C12200 phosphorus-deoxidized copper, the same ACR-grade alloy that Mueller Streamline has specified across its professional line set program for decades. C12200 copper holds less than 0.04% residual phosphorus, which eliminates internal oxidation during the tube-drawing process and keeps the interior bore clean and contamination-free throughout the refrigerant circuit. That bore cleanliness matters. Any particulate left inside a refrigerant line during manufacture can migrate through the system, damaging compressor valves, clogging expansion devices, and triggering premature equipment failure. Mueller's controlled manufacturing environment and drawn-tube process produces a seamless copper tube with consistent wall thickness from one end of the 35-foot coil to the other - no seams, no weld lines, no variation in cross-section that could create turbulence in the refrigerant flow path. The tubing arrives factory-sealed at both ends, protecting the interior bore from moisture, atmospheric oxygen, and job-site debris between the point of manufacture and the moment an HVAC technician cuts and flares the plain ends in the field. Why the 3/8" Liquid Line & 3/4" Suction Line Pairing Serves Mid-Capacity Ductless Systems Contractors working with mid-capacity ductless mini split systems will recognize the 3/8" liquid line and 3/4" suction line combination as a sizing profile matched to 18,000 BTU and 24,000 BTU outdoor condenser units - the 1.5-ton and 2-ton range that covers the majority of single-room and whole-floor mini split installations. The liquid line carries refrigerant in its high-pressure, subcooled state from the outdoor condenser to the indoor evaporator unit, while the larger-diameter suction line returns low-pressure vapor back to the compressor. Matching line set diameter to the OEM's specified connection size is not a matter of preference - it directly governs refrigerant pressure balance across the circuit. An undersized suction line restricts vapor return, raising suction pressure and forcing the compressor to work harder. An oversized suction line reduces refrigerant velocity to the point where oil circulation suffers and the compressor loses adequate lubrication over time. The 612205350C hits the correct sizing window for systems in this BTU class. Always cross-reference the mini split manufacturer's installation manual to confirm the specified line sizes for your exact outdoor unit model before ordering. What Makes the 1/2" Elastomeric Insulation Wall on MPN 612205350C Critical for Energy Efficiency The 1/2"-wall black elastomeric insulation on this Mueller line set does more than prevent surface sweating - it functions as a continuous vapor barrier and thermal break that keeps the
Visit Product Page
