Milescraft 1324 Pocket Jig 100 PocketJig100 pocket hole jig allows you to connect your workpieces in a quick and timely manner or do repairs around your house. Small, compact design allows you to do applications where a small jig is required. Built-in board thickness locations for easy measurement and set-up of your workpieces, virtually eliminating the need for manual measurements. Everything you need to get started with your first pocket holes! PocketJig100 Designed To Make Repairs Simple No fence and the small design allows you to get into some of the smallest places to make repairs to many joints Hardened Steel 3/8 Drill Bushing For precise and accurate pocket holes every time using the Milescraft PocketBit Tight tolerances between the bushing and the drill bit, reduce tear-out and create a clean pocket hole on the first try Recessed Clamp Pocket with Magnet Helps to keep the clamp in the same position as you move to different locations With the stronger rare earth magnet, you can easily clamp the jig from one location to another For speed and accuracy, use the Milescraft 3 Face Clamp Board Thickness Settings Four common board thickness settings built into the jig: 1/2, 3/4 1 and 1-1/2 (12, 19, 27, 38mm) Convenient Built-in Depth Setting Easily set your bit for the correct drilling depth 3/8 Split Design Stop Collar with Flat The split design prevents slipping of the set screw when tightened and the flat prevents the bit from rolling Includes hex key for tightening 3/8 HSS Step Drill Bit Made from high-speed steel the PocketBit with 1/4 hex shaft is designed to reduce clogging and provide smooth and precise holes 6 Magnetic T20 Star Driver For maximum torque settings without stripping Allows pocket screws to align with maximum precision Includes: Single Barrel Pocket Hole Jig 3/8" (9.5mm) PocketBit 3/8" Stop Collar 6" Magnetic T20 Star Driver Hex Key Instruction Manual Specs: Jig Body Material: Reinforced Nylon Clamping Method: Works with any clamp For use with: Wood Materials from 1/2" t0 1.5" thick (12 - 38mm) Drilling Angle: 15 Driver: Magnet 6" T20 Torx Driver Drill Bit: 3/8" (9.5mm) HSS Pocket Bit with 1/4" shank
Visit Product Page
