Skid Steer 3 Point Attachment Adapter Reviews

4.4 Rating 128 Reviews

This 3 Point Skid Steer Attachment Adapter is a universal skid steer style mount that will fit John Deere, New Holland, Bobcat, and Kubota tractors. Our attachment rivals top-notch construction vehicles in their potential to help you lift and safely transport heavy loads on a farm, ranch, or construction site. The Skid Steer Style, 3 Point attachments plate provides easy 3 Point attachment to Category 1 implements that are not driven or powered by a PTO shaft. This tool has adjustable lift arms that can assist you when moving large loads, including building materials, animal feed, bales, and waste products. Whether moving something large or small, this sturdy skid steer adapter will help you do the job much more effectively. Additionally, this plate comes with a 2" trailer hitch for your convenience.

Visit Product Page

Phone:

800-605-7595

Email:

info@palletforks.com

Visit Product Page

“Be warned...as of 4/25/18, this is NOT for category 1 implements. The holes measure 1 1/4", which is a loose-fitting category 2. You will need to purchase reducer bushings to use it for category 1. Another review noted this as well. Other than that, the attachment seems to be of the same good quality as my first Titan order. Customer service was VERY responsive to my concern, and made every attempt to make it right once I supplied photos. So, I will definitely be purchasing from here again. My main complaint is packaging though. I realize it must be very difficult to ship a hunk of metal across the country using FedEx. That being said, better packaging should be used to protect the finish. My attachment had loose-fitting cardboard taped around it with zero padding. So, the corners appear like they have been dragged over concrete for a while. Oh well, a quick shot of spray paint before doing damage to the finish myself...”

Helpful Report

Posted 8 years ago

“The first unit was dedicated to a landscape rake used on the front of the skid steer, pulled in reverse. The rake's solid bar from top link position was replaced with chain to allow an independent float function, assuring only the weight of the rake was used without skid steer weight down pressure... fantastic function!!! The adapter plate quality of materials and welding was fine, and has held up nicely through hard use.”

Helpful Report

Posted 8 years ago

Helpful Report

Posted 8 years ago

“Easy way to change a 3 point hitch equipment into Quick hitch for front loader temporary. Equipment that can be used on front of tractor and later easily changed back to rear 3 point hook up (examples scrape, carryall, boom pole, etc.) Just Make sure if mounted on front your tractor has enough aÃ¢â‚¬â€� to handle il. DonÃ¢â‚¬™t let the front overload the backside. This is lite wait conversion so you canÃ¢â‚¬™t overload without reinforcing key areas. First time you overload youÃ¢â‚¬™ll see where reinforcement is needed. I use this on a WorkMaster 50 New Holland attached to a 8 ft. HD scrape for scraping snow. Trying to scrape dirt showed me where to reinforce certain areas.”

Helpful Report

Posted 8 years ago

“Easy way to change a 3 point hitch equipment into Quick hitch for front loader temporary. Equipment that can be used on front of tractor and later easily changed back to rear 3 point hook up (examples scrape, carryall, boom pole, etc.) Just Make sure if mounted on front your tractor has enough aâ€” to handle il. Donâ€™t let the front overload the backside. This is lite wait conversion so you canâ€™t overload without reinforcing key areas. First time you overload youâ€™ll see where reinforcement is needed. I use this on a WorkMaster 50 New Holland attached to a 8 ft. HD scrape for scraping snow. Trying to scrape dirt showed me where to reinforce certain areas.”

Helpful Report

Posted 8 years ago

“I am happy with the quality of this attachment. Titan products are all very good, and I have purchased several. However, before you buy this adapter, think about whether you might not be better off to sell the old 3-point attachments and get actual skid steer attachments. My 3-point pale spear just was not heavy-duty enough to do the job, and the loss of leverage due to the extra distance from the adapter to the 3-point implement increased the problem of tipping for my skid steer with heavy bales. I have now ordered a real bale attachment from Titan and I wish I had done so first, rather than ordering the 3-point adapter. That said, the adapter is useful for moving trailers around and also for moving other 3-point implements, but I will not be using it to work with the implements. Spend the money and buy the correct tool the first time. It seldom pays to try to be cheap.”

Helpful Report

Posted 10 years ago

“thanks for the attachment”

Helpful Report

Posted 10 years ago

“I could not be happier with this purchase for my Kubota tractor. It connects quick and easily to my quick attach front loader so I can get more use out of my boom pole and carry all, as well as my other non PTO 3 point implements. (Carry All is also a fantastic Titan product that I just purchased). The only issue that I had and not sure if it was just a picking error or my misunderstanding, was that I had to buy 2 cat 2 top link pins and bushings to reduce the lift arm holes from cat 2 to cat 1 before attaching my cat 1 implements. All of the mounting holes we sized for cat 2. Now my wife can't keep me off of the tractor or the Titan website because I can't stop looking at all the other implements I want to buy since I can attach them to the front loader. My future looks expensive..... :)”

Helpful Report

Posted 10 years ago