Post And Tree Puller Fits John Deere Tractors Reviews

4.7 Rating 18 Reviews

Whether you need to remove stubborn fence posts, take care of tough tree roots, or clean up a job site, our Post and Tree Puller covers all your needs. The Puller features 4" x 4" steel tubing equipped with 2" x 10" hydraulic cylinders, which power the jaws featuring 1" thick steel teeth. It can take out tall trees at the base without leaving roots or debris behind. The versatile attachment is compatible with John Deere tractors featuring a hook and pin connection and comes with hoses and pioneer couplers to maintain consistent pressure levels during operation. By pulling the greenery out of the ground, there is no need for stump treating, which saves money and the environment.

Visit Product Page

Phone:

800-605-7595

Email:

info@palletforks.com

Visit Product Page

“Easy to pull posts and small trees”

Helpful Report

Posted 8 months ago

“Well, it is certainly simple and brutal! Been pulling up small trees and clearing lanes. You can also reach high and tear off low hanging limbs. Only one complaint and one suggestion. Complaint is you can't see when crawfish claw (that's what we call it) is close to the ground. You gotta kinda judge where you are going. Nothing can be done about that. The suggestion is that the pins holding the hydraulic cylinder really need some grease zerts. A very cheap but needed addition that I will likely get around to doing myself.”

2 Helpful Report

Posted 1 year ago

“Pros……….. The Titan post and tree puller arrived in a metal cage wrapped in plastic well protected and secure. I cut the bands and lifted the tree puller out of the top of the metal cage, unwrapped the plastic and sat the puller on the floor. The unit is John Deere green and is well built. Hook and pin fit perfect. Cons……… *The Titan tree pullers hydraulic lines and fittings are (1/2 Hydraulic Quick Connect Pioneer Style Poppet Valve Couplers, 1/2” NPT Thread) that fit onto my 3025e John Deer’s 3rd function lines and connectors that are (1/4” Ag ISO 5675 Hydraulic Quick Connect Pioneer Style Poppet Valve Couplers, 1/4” NPT Thread). The Titan tree puller fittings were to big and needed the smaller ¼” fittings along with reducers (½ fnpt to ¼ mnpt reducers), these reduce the Titan hose ends that are ½” npt down to the smaller John Deere ¼” npt hose ends. *Once I installed the correct Hydraulic Quick Connect Pioneer Style Poppet Valve Couplers and reducers from AMAZON, I attached the Titan tree puller on to my 3025e John deere, connected the fittings, started the tractor, activated the 3rd funtion on the John Deere which operates the Titan tree puller. That’s when I seen their hose connector to the hydraulic cylinder fitting was extremely loose. Out of the 2 connecters on the hydraulic cylinder, the one was loose and the other was tight. Once I tightened the connecter and verified the other one was tight, the leak there was fixed. * The tree puller arrived by freight (Saia). Saia’s web site said residential with tailgate delivery. Other than updates via their web site, I had no Ideal exactly when or if they could deliver to and in my driveway. So, at some point, the web site did give a delivery time window but still not sure about driveway delivery, even though they said residential delivery. I left work early to be sure I was there for the earliest estimated delivery time. Delivery was on the street, and I used my tractor with pallet forks to get it off their semi tractor trailer to my pole barn 400ft away. It would be nice if the freight delivery driver would actually call me and give details about delivery and times! Amazon….. Fittings I bought to make this fit my John Deere 3025e. *1/4” Ag ISO 5675 Hydraulic Quick Connect Pioneer Style Couplers Poppet Valve, 1/4” NPT Thread. Male and Female. https://www.amazon.com/dp/B078SY8NST?psc=1&ref=ppx_yo2ov_dt_b_product_details. * 304 Stainless Steel Pipe Fitting, Reducer Adapter 1/2" NPT Female x 1/4" NPT Male Thread Adapter(6-PACK) https://www.amazon.com/dp/B0CQ2QR9T2?psc=1&ref=ppx_yo2ov_dt_b_product_details.”

2 Helpful Report

Posted 1 year ago

“I'm sure this will do the job but the hose couplers were the next size up from what I have on my third function system. I'll get it taken care of but just be aware it's not plug n play on the smaller tractors.”

1 Helpful Report

Posted 1 year ago

“The post and tree puller is the second Titan attachment I have purchased in 2024. Quit impressive quality attachments. I purchased pallet forks for a JD hook and pin in January. Very well built. The 2nd attachment a Tree and post puller for a JD hook and pin. It pulls 4"-5" diameter cedar trees quite easily. I mainly purchased to pull fence posts surrounding pastures so new fencing can be installed. The post puller certainly is much easier than a loader and chain per post! Great quality. Titan crated the attachment very safely and securely. The shipping company(Saia LTL Freight) was incredibly helpful meeting me at a location (my request) to unload versus travel country roads in raining weather.”

Helpful Report

Posted 1 year ago

“This unit works pretty well - I've used it so far to yank up to 5" Russian Olive trees and it does the job. The jaws are fairly small and the cylinder/fittings are not well protected, but with a little care you can get quite a lot done. The main problem was that not only were all the hydraulic fittings only hand tight, but the Pioneer adaptors provided wouldn't even thread onto one of the hoses. After messing with it for awhile, I took the hose off and down to a local hydraulic place - turns out that one of the hose ends was NPT, the other was British thread. Amazingly the hydraulic place had an adaptor (which normally are hard to find) and I was in business, but customers shouldn't have to DIY the hydraulics to get them to work.”

1 Helpful Report

Posted 1 year ago

Hello! Thank you for the positive feedback regarding your entire experience! Here at Titan, we pride ourselves on positive customer experiences from purchase to delivery so we are overjoyed with this feedback. You may also submit a product suggestion through this link, https://support.palletforks.com/hc/en-us/requests/new?ticket_form_id=360000995071. We hope to be able to serve you again!

Posted 1 year ago

“Works great.”

1 Helpful Report

Posted 1 year ago

“Received my P &T puller and it fit perfect, is made exceptional well and functioned correctly the minute it was attached,, how ever,,who ever put the hydronic line fitting's on must be a real sissy, 3 of the 4 fittings loosened up and squirted fluid every where,,after re-seating and tightening them and ADDING FLUID, I put about 6MORE hours on it with no incidents. Great piece of equipment.”

1 Helpful Report

Posted 2 years ago

Hello! Thank you for the feedback regarding your entire experience! Here at Titan, we pride ourselves on positive customer experiences from purchase to delivery so we are overjoyed with this feedback. We hope to be able to serve you again!

Posted 2 years ago