Clone A Willy Vibrator Kit-standard Reviews

4.3 Rating 11 Reviews

About With a Passion Ltd:

As the UK's leading online adult sex toy shop, we offer a huge range of top brand adult sex toys at up to 75% off RRP such as rabbit vibrators, dildos, anal toys, and male sex toys including Fleshlight and Tenga.

Aside from selling a very vast cross-section of sex toy products for our heterosexual, gay and fetish audiences, we strive to go above and beyond with our sales support and aftercare. Our outstanding sales team are on hand to answer any questions you might have from how to purchase to what’s right for you. Check out our sex toys buyers guide with information and advice on the choosing the right sex toy for you and tips on sex toy cleaning and hygiene.

No matter what you decide to purchase, you can rest assured that with our same day dispatch on all orders before 4pm from our fully stocked warehouse, means you get what you want and fast! With up to 75% off RRP’s, you won’t find our products anywhere else cheaper and in the unlikely event that you do, we’ll even price match too!

Visit Product Page

Phone:

0800 195 7474

Email:

customerservice@withapassion.co.uk

Location:

FREEPOST WITH A PASSION LTD Freepost Name License FPN4876 , ,
BN15 8UQ

Visit Product Page

“I recently purchased your clone a willy kit and I have to say the result was horrible!! Did every thing by the book. My end product was nothing like my penis. My partners came out ok but I was very disappointed as it was a birthday treat. I have to admit I would not recommend it any time soon. I would maybe try again but they are not a cheap product”

Helpful Report

Posted 4 years ago

Helpful Report

Posted 4 years ago

Verified Buyer

Verified Reviewer

“I bought this Clone-A-Willy Vibrator Kit when I saw a thread on the sextoys.co.uk forums about them. I decided that I really wanted to have a copy of my Daddy's penis and badgered him until he agreed to let me do one. Because I prefer to have my cake and eat it too, I chose the vibrator kit instead of the normal one and would happily have had the Glow in the Dark version if it had been in stock at the time. As it was, I was too impatient so I got the one there was and bounced around happily as I waited to use it. Almost an entire year later, we finally have accomplished it. PRESENTATION The Clone-A-Willy Vibrator Kit comes in a tube exactly the same as in the initial picture. It has a black handle for hanging it up and the label is a vivid colour to make sure you have picked up the one you want. It isn't the classiest design I've ever seen, but it certainly isn't tacky either. Plus you use some of the packaging in order to make the product itself, so it actually has more than one use, which I liked. Included inside the tube are two pots of liquid, a bag of powder, a vibrator, a thermometer and a stirring stick. The instructions are on the back of the red label, which is actually a rolled up piece of paper inside the tube. For those wondering, the tube itself is what you use when you take a mould of your penis: you simply cut it to size with scissors first. CONSTRUCTION In order to use this kit you need a spatula, measuring jug, two mixing bowls and some scissors. You may also want to buy a cock ring or similar in order to make sure your partner (or yourself, if you plan to do it alone) stays hard during the process. We tried to make this kit twice. The first time was when we were staying at a hotel. I misread the instructions and heated the water to 100”

Helpful Report

Posted 11 years ago

Verified Buyer

Verified Reviewer

“On arrival, it was packed well and discreetly addressed, 2 things I like to see, as Royal Mail aren't really known for their gentle handling skills! Instantly I knew that using this kit would be mucky but fun, I couldn't wait to try it out. Opening up the kit, I laid out in front of me 2 pots of liquid ( 1 x liquid rubber & 1 x liquid skin mix), a wooden stirrer stick, molding powder, instructions, molding tube, vibrator and a thermometer. I will quickly relay the instructions; 1 - Cut the plastic molding tube down to size. To do so, you/your partner will need to be fully erect. 2 - Measure out 425ml of hot water (37c) 3 - Poor water into a mixing bowl, then add in the molding powder and stir for 1 minute before pouring into the molding tube. The mixture may still be a little lumpy, don't worry. 4 - Placing your/his penis into the tube full of mixture. It says on the instructions to wait 2 minutes before removing the mold. 5 - Remove penis, carefully as you may end up ripping hairs out! 6 - Mix the 2 pots of liquid together - use a disposable container for this part. 7 - Before pouring the liquid into the mold, cut out a piece of cardboard. Slice a hole in the card board that is big enough to fit around the top of the vibrator. The cardboard will hold the vibrator in place. 8 - Poor liquid into mold, then slowly insert the vibrator. Make sure you leave an inch of space between the top of the mold and the liquid, as the liquid will rise up as the vibrator is placed in. 9 - Leave the mold in a safe place, out of the reach of kids and animals. It has to rest for 24hrs. 10 - When you go to remove the clone cast, be gentle. I found that cutting a slit into the plastic, then gently squeezing the tubing to undo the mold, works. Once the clone is out, remove any unwanted lumps and then let your clone air for a few hours before using. You will find you will need the following items, as they are not supplied; Scissors Pen (use to mark the tube) Cardboard Mixing bowl and a disposable mixing bowl Towel Wet wipes/baby wipes. Cock ring 1 x AA battery You will need 2 people to make this mold work, as it can be pretty fiddly. This is a kit that you can have fun with, myself and my partner in crime (D) had a lot of fun, leading up to the actual molding. If you're a fan of foreplay, then you will love the build up. Once he was hard, I began mixing the molding powder with the 37c water for 90 seconds. During this time, D placed a cock ring around the base of his shaft, to help keep him fully erect. Once the mixture was formed, we poured it into the plastic molding tube, as per instructions. Now the mucky bit, he dipped his penis into the molding solution. I will say that you need to keep the penis literally dead center, unfortunately my partner was off center. Once the mold set (approx. 2 mins), then we gently and slowly slipped the tube off from around his penis. It is best to use 2 sets of hands with this part of the process, as the mold pulls at the skin and could rip around the top of the tubing area. I then set about mixing the skin and rubber liquid together, before D poured it into the mold. We left an inch space from the top of the molding tube, as per instructions. You will want to place down some paper towels, just in case the liquid mixture over spills. D then slowly place the vibrator into the molding solution and we set it aside to set. 24hrs later, I slowly removed the mold from the plastic casing. I found I had to cut with the scissors, around the top of the tube, so that I could begin to remove the mold. Once the tube came away, the molding around the clone, simply fell away and voila, my prize of D's cloned willy was safely in my hands! D had informed me that the original molding mixture was cold, which actually effected his full size being molded. I was a little disappointed as D has a glorious manhood, which wasn't fully portrayed by this kit, however, the detail of his veins and head came out perfect. D had also asked me to advise that any man, using this kit, should fully shave his pubic area and thigh area, as the mold will pull and rip out hairs, when you remove it from your penis. The vibrator that is used with this Clone-a-willy takes 1 standard AA battery, which is not included with the kit, so you will need to supply one yourself. The vibrator only has 1 speed, which for me, is of average strength for a single speed vibrator, although there is nothing disappointing with that, as it hits the right places! We both felt that the water will need to be warmer, as once it is mixed with the molding powder, it cools right down. The problem we faced is that it effect D's ability to stay fully erect. Other than that, we had a fun pact evening, it's defiantly a kit to play around with but you must following the timings in the instructions. I personally feel that for an RRP of”

Helpful Report

Posted 11 years ago

Verified Buyer

Verified Reviewer

“I'll start my review by mentioning that for a few years now I've had my eye on the Clone-A- Willy kit. After getting married recently I figured that there was no better time to commit to lovingly cloning a man's penis. With my husband well aware that it's been an idea in my head for years, I know he was more nervous about the moulding process than anything else! The Clone-A-Willy Kit arrives packaged in a clear plastic cylindrical tube. Inside is almost everything you will need to make a perfect clone of your or your partner's penis. The kit includes: -Moulding Tube -Moulding Powder -Thermometer -2 Part Rubber Mix -Stir Stick -Vibrator - Instructions Some things you will need that are not included, -A cock ring -A mixing bowl (although we used a small storage box instead) - A small piece of cardboard - A sharp knife (for cutting away any lumps or bumps) Seeing as the moulding process can be a messy job and knowing he felt the pressure to get it right, I decided to leave my partner the job himself. The experience section of my review was kindly included by him. Experience: There are several stages in using the 'Clone-A- Willy'”

Helpful Report

Posted 11 years ago

Verified Buyer

Verified Reviewer

“Amazing, it looked and felt great! The only problem was, was that my penis didnt go all the way in, because the product was too small i could have got another 2 inches in, but my penis is very big, so it is probably for the average.”

Helpful Report

Posted 11 years ago

Verified Buyer

Verified Reviewer

“lots of fun it now stands proud on my TV”

Helpful Report

Posted 11 years ago

Verified Buyer

Verified Reviewer

“Very fun to do, mess is easily cleaned up and results were great, picks up on every little detail but yo0u have to be quick. Would recommend!!”

Helpful Report

Posted 11 years ago