I bought a higher end kit with various sandpapers, prep cloth, primer, color coat and clear coat as well as a few other odds and ends. On the upside, all of the materials where there to do a good job. On the downside, the color match was not good (I did use the color code from the original window sticker off the vehicle when it was new). I used the test card and it looked good there, but when I put paint to fender, it was/is too dark. It was close until I put the clear coat on and it seemed to darken a bit more. I am considering redoing it with the same kit to see if I can either get a better match or decrease the size of the painted area - to the bare minimum. In addition, a brief printed instruction sheet in the kit would have been a nice add so that I didn't have to go back on line to look for instructions. On that same subject, something more substantial for instructions on line would be nice too. (tips for success on sanding, applying each layer, and even using the polishing product).