Our bath is boxed in both ends requiring a front panel only, cut slightly shorter than 1700mm. As described this panel can easily be shortened. The height is 526mm high a perfect height for our bath. Some panels are only 500mm high. Think of the panel as a flat piece of glass with the raised part in the middle only. The top hedge can fit into a slot and the bottom edge can touch a floor mounted batten, no need for the batten to be raised off the floor which would be required if the panel had have had a bottom corner. The panel is thin enough to be easily cut. We used an Engineers Hacksaw with a fine blunt blade and finished off with a file.