Osmo Wood Protector Reviews

4.6 Rating 5 Reviews

Osmo Wood Protector is a clear substance based on natural oils and waxes and it is used to make timber water-repellent prior to the application of Osmo Top Oil or Polyx Oils, especially suitable for woodsÂsusceptible to blue stain in rooms prone to dampness, bathrooms, kitchens etc, a must use product on worktops.It is a clear liquid with deep penetrating properties and is biocide free and absolutely safe on food preparation surfaces. When dry it is invisible and leave no residue or tell tail signs of application, leave to dry for a minimum of 24 hours before the application of the finishing coat.Osmo Wood Protector is free of organic biocides makes it ideal for use on interior joinery and children's toys.This product is also suitable for Exterior application.ApplicationÂ-Âby brush or dipping, 1 generous coat only required applied to all sides if possible, allow to dry fully.ÂCoverage - 8.4 m2 per ltr.Â Available -ÂÂ 0.75L and 2.5LÂFor further information and application methods, health and the environment see the technical data sheets in the downloads tab below.

Visit Product Page

Phone:

01789 778628

Email:

email@agwoodcare.co.uk

Location:

Unit 3, Waterloo Industrial Estate, Bidford-upon-Avon
Alcester
B50 4JH

Visit Product Page

Wordsley Post Office

Verified Reviewer

“Excellent product. Delivered on time .Would use this company & product again.”

Helpful Report

Posted 9 years ago

Grahame Rose

Verified Reviewer

“I have nothing but praise for AG Woodcare Products who provide a very good service indeed.”

Helpful Report

Posted 9 years ago

D H R Huxtable

Verified Reviewer

“Used on a 50yr old Oak door, which I had stripped (with great difficulty) using Nitro*** and a chisel and a plane. I suspect that previous treatment had included some form of 'liming wax' finish, since the paint layers seems to include a chalky white layer over a dark substrate. My work with the chisel had taken the wood surface down to raw wood in places. I found that the Basecoat just would not dry (3 days plus in a well ventilated garage and it was still tacky and showed fingerprints in the surface - on advice from AGW I washed the residue of the base coat off with White Spirit - I had to do this 3 times, and use a scraper before I felt confidant enough to reapply the base coat and the Elan Topcoat(s), which so far seem to be OK - but I remain uneasy. I would prefer not give it a rating - since my experience was rated by AGW as 'exceptional' - but the system insists - I suspect that the Wax was the problem - so my rating is neutral.”

Helpful Report

Posted 9 years ago

Angela Duquemin

Verified Reviewer

“.”

Helpful Report

Posted 10 years ago

Denise Birchall

Verified Reviewer

“I was very pleased with my purchase I ordered it and it was delivered the next day would will be recomended.”

Helpful Report

Posted 10 years ago