Rustins Plastic Coating Reviews

4.8 Rating 8 Reviews

Two part cold cure acid catalysed lacquer for use on interior wood, hardboard, cork.A highly durable clear non yellowing finish for all interior furniture and woodwork. Heat, impact, alcohol & solvent resistant, durable with excellent flexibility and abrasion resistance.Quick drying clear gloss finish, for all furniture, doors, stairs, shelves, musical instruments and many other uses.Extremely good adhesion to the surface, can be burnished to a mirror like gloss, or rubbed down to a smooth satin finish with wire wool and wax.Supplied as a two pack kit, hardner and clear coating to be mixed before use,.Application:Â by brush or roller.Requires Rustins plastic coating thinners to be added to the mix to help with the flow and to clean the equipment after use.Coverage: 13-15 sq m per litre(This product gives off a strong pungent vapour whilst curing)Available: 250ml, 1L and 5L kitsFor floors see Rustins Plastic Floor Coating.For further information and application methods, health and the environment see the technical data sheet in the downloads tab below.

Visit Product Page

Phone:

01789 778628

Email:

email@agwoodcare.co.uk

Location:

Unit 3, Waterloo Industrial Estate, Bidford-upon-Avon
Alcester
B50 4JH

Visit Product Page

Paul Emerson

Verified Reviewer

“This product was purchased to protect wooden archery arrows I made. I have tried yacht varnish, floor stains & various other varnishes in the past but none had a satisfactory hard wearing finish, there is quite a lot of friction as the arrow enters the straw target. This product is 2 pack with a 4 to 1 mixture ratio, quite easy to measure using old 2ml syringes, one for varnish & one for the hardner, from our friendly vet ! The varnish is very free flowing with no brush strokes visible & fast drying. I was able to rub down after 1 hour for 2nd & final coat. The other week I lost an arrow in the grass where it remained buried for well over a week. Today it has been found totally unscathed, still straight as a die & bone dry. Normally a week is plenty time for moisture to get in & turn wooden arrows into soggy useless bananas. Absolutely brilliant product !! I have put 2 coats on a dozen arrows plus 1 coat over 8 other arrows which went on beautifully over an existing exterior varnish & has barely used 1/4 of the 250ml varnish I bought. I consider that to be excellent value for money.”

Helpful Report

Posted 8 years ago

Matthew Hutchison

Verified Reviewer

“Excellent service as usual. Will continue to buy from here.”

Helpful Report

Posted 8 years ago

“Great product, easy to use, brush strokes quickly disappear. Did not need to sand between coats and went on top of original varnish no problem.”

Helpful Report

Posted 8 years ago

Paul Huntley

Verified Reviewer

“Used this product for at least 20 years now never let me down yet. I have used the plastic coating for wood inside and out, My Work surfaces in the Kitchen, My Coffee Table in the Living Room, Decking (very thin protective cover). Bushes on evenly, Nice Finish on its own, but on my Kitchen (wooden work surface) I used the Burnishing Cream came up like Glass. Great.”

Helpful Report

Posted 8 years ago

Dawson Construction Plant

Verified Reviewer

Author didn't leave any comments.

Helpful Report

Posted 9 years ago

Terence Hodkinson

Verified Reviewer

“excellent service great product”

Helpful Report

Posted 9 years ago

Heather Norton

Verified Reviewer

“I used this on a pine kitchen table. It was easy to apply but the second coat 'crazed' in some places even though I had applied in a warm room and followed the instructions re drying times - however this was the first time I had used this product so maybe I did something wrong? I tried using 00 wire wool to take back the surface to a satin finish as instructed but found I could not get an even finish so I ended up removing the coating altogether and using a varnish instead - sorry! On the plus side I was impressed with the clear instructions and safety kit provided and if you are looking for a durable high gloss plastic coating this would probably fit the bill - just wasn't for me!”

Helpful Report

Posted 9 years ago

Huw Lloyd-HUghes

Verified Reviewer

“This is an excellent indoor product for wood. It's a two-part clear thin compound which is brushed on very easily and quickly . It is touch dry in no time, takes several hours to fully cure and you must not recoat for a day or two or it can wrinkle . It is intended for bare wood; I used it over new Sadolin-coated wood , fully and thoroughly dried and it was fine.You can build up the finish by using two or three coats for a very high piano-like finish, with very light sanding in between coats to remove little nibs. Use a soft brush. When cured, the finish is very hard and is non yellowing. Wood which I coated six years ago is still like new and that's the difference between this stuff and ordinary varnish. You may have to throw your brush away after use, it is difficult to clean off . They give you some brush cleaner in the kit but not much. They also provide a burnishing paste in the kit but I found that I didn't need to polish it to get that deep glossy finish. This is a really good product.”

Helpful Report

Posted 9 years ago