Instruction ManualST02071722 76mm Post Stand Dual Pneumatic Arm
Instruction Manual-English.pdfQuick OverviewDual Pnenmatic Arm.
Dia. 76mm Scope Holder, Monitor Holder. Vertical Post Height: 400mm. Vertical Post Diameter:
Dia. 32mm. Total Arm Length: 600mm. Mounting Hole on the Top of Horizontal Arm: M4.5 54x88mm. Mounting Hole on the End of Horizontal Arm:
Dia. 32mm. Base Dimensions: 90x90x15mm. Focus Distance: 50mm . Adapter Mounting Size of Monitor: 75x75mm
100x100mm
M4. Mount Adapter Size of Stand: M6 Pitch 15x15mm. Clamp Opening Size: 0-62mm. Clamp Opening Size: 0-50mm. For ST02071512 Pneumatic Arm. ST02071722 76mm/Monitor Holder Vertical Post Dual Pneumatic ArmFlexible ArmStand TypeDual Pnenmatic ArmHolder Adapter Type Dia. 76mm Scope Holder, Monitor HolderVertical Post Height400mmVertical Post Diameter Dia. 32mmTotal Arm Length600mmMounting Hole on the Top of Horizontal ArmM4.5 54x88mmMounting Hole on the End of Horizontal Arm Dia. 32mmHorizontal Rotation Angle360° Degree RotatableHorizontal Arm Maximum Load8.00kg (17.64lbs)Horizontal Arm Travel Mode on Horizontal DirectionManualHorizontal Arm Travel Mode on Z DirectionManualBase TypeClampBase ShapeFan-ShapeStand Throat Depth129mmBase Dimensions90x90x15mmFocus ModeManualFocus Distance50mm Coarse Focus Distance per Rotation22mmAdapter Mounting Size of Monitor75x75mm
100x100mm
M4Clamp Opening Size0-62mmMaterialMetalColorBlackNet Weight5.55kg (12.24lbs)Clamps and StandsClamp for Pneumatic Arm PostMount Adapter Size of StandM6 Pitch 15x15mmClamp Opening Size0-50mmSurface TreatmentSpray PaintMaterialMetalColorBlackNet Weight0.63kg (1.39lbs)Applied FieldFor ST02071512 Pneumatic Arm
.tb_part
{
width: 100%;
border: solid 0px #ccc;
font-size:12px;
}
.tb_part tr
{
height: 30px;
line-height: 30px;
}
.tb_part td
{
white-space: nowrap;
}
.tb_part_1 td
{
white-space: wrap;
}
.normal{
border-left:solid 2px black;
border-right:solid 2px black;
}
.tb_part tr.normal td
{
border:solid 1px #ccc;
padding-right:5px;
}
.tb_part tr.normal:nth-child(2){
border-top:solid 2px black;
}
.tb_part tr.normal:first-child{
border:none;
}
.tb_part tr.normal:first-child td{
border:none;
font-weight:bold;
font-size:16px;
}
.end-border{
border-bottom:solid 2px black;
}
.tb_part tr.memo,.tb_part tr.memo td{
border:none;
}
Technical InfoInstructionsMicroscope StandClose ΛMicroscope stand have many options depending on the needs, especially stereo microscope stand, there are several factors to consider before choosing: Stability: microscope stand is used to prop up the microscope body. The stand should be selected according to the size of the microscope mainframe. The stability of the stand determines the stability of the microscope in use, and its various adapters and screws must be tightly locked. Volume size: limited by the working environment and space of the workbench. Workspace and scope: the size of the workspace of the object being observed and the height of the object being observed should be considered. Choice of lighting: some stands are equipped with a light source, but some are not, depending on whether there are conditions to add additional lighting.
Operational requirements: 1. Install the stand as required. 2. Arrange a reasonable fixed position for the stand. 3. Carefully tighten the microscope mainframe. 4. Arrange the location of the additional light source reasonably, and place the electric wire in a position that does not interfere with the work. 5. Connect the various kinds of peripheral devices, such as cameras, monitors, computers and so on. Flexible ArmClose ΛFlexible arm is an arm or stand that imitates the human arm. It is a combination of several mechanical arm joints to complete the horizontal and vertical movement and freely adjust the focus position of the microscope. Flexible arm allows the microscope to move flexibly and freely over a wide range, and is also suitable for viewing larger objects. The fixing method of the arm is usually optional, with strong interchangeability. Below the observation of the microscope there is an empty workbench, which can be used to place various kinds of platforms, work operating tables, tools, etc., and can be freely combined into different working positions. In industrial places, most of the working positions are fixed. Sometimes, a lot of tools, equipment and instruments need to be placed in one working position. Because the microscope is relatively large in size and takes up also a relatively bigger space, and not convenient to move back and forth, therefore the flexible arm can be placed in a flexible position, and does not occupy the most commonly used workbench. When in use, the microscope can be moved over, and pushed to the side when not in use. This is very suitable for use in electronics factories, installation and maintenance, medical and animal anatomy, archaeology and other industries. Flexible arm generally does not have a fixed focusing device, and you can choose a variety of flexible accessories. When adjusting the height of the flexible arm, you need to use both hands at the same time, with one hand holding the microscope or the forearm of the stand, and the other adjusting the adjusting screw or spring mechanism that looses/tightens the arm. When releasing, pay attention to avoiding sudden sliding down.
Because one needs to ensure the flexibility of the arm or stand, there are many locking buttons in all directions. After the necessary locking buttons are adjusted, it must be ensured that each knob is in locked state to avoid sliding, tilting, and flipping of the microscope, thereby damaging the microscope and the items on the workbench.
Flexible arm has a mechanism of the hydraulic spring for adjusting the pre-tightening tension. When different microscopes weigh differently, these flexible arms can be adjusted to make the microscope more stable. 360° Degree RotatableClose ΛThe eyepiece of the microscope can have different viewing or observing directions. When the position of the microscope is uncomfortable, the direction of the eyepiece tube of the microscope can be adjusted, to facilitate observation and operation.
Placement method of different viewing angles of the microscope: General direction: the support column is behind the object to be observed Reverse direction: the support column is in front of the object to be observed Lateral direction: the support column is on the side of the object to be observed Rotating eyepiece tube, different microscopes may have different methods, for some, the direction is confirmed when installing the eyepiece tube of the microscope, for some, by rotating the body of the microscope, and for some, by rotating the support member on the support or holder of the microscope.Stand Throat DepthClose ΛStand throat depth, also known as the throat depth, is an important parameter when selecting a microscope stand. When observing a relatively large object, a relatively large space is required, and a large throat depth can accommodate the object to move to the microscope observation center.Clamps and StandsClose ΛBase clamp is the clamp of the microscope stand that is clamped on the side of the desktop. Pay attention to confirm in advance whether the material and thickness of the tabletop can withstand the weight of the microscope stand and the body. PackagingClose ΛAfter unpacking, carefully inspect the various random accessories and parts in the package to avoid omissions. In order to save space and ensure safety of components, some components will be placed outside the inner packaging box, so be careful of their inspection. For special packaging, it is generally after opening the box, all packaging boxes, protective foam, plastic bags should be kept for a period of time. If there is a problem during the return period, you can return or exchange the original. After the return period (usually 10-30 days, according to the manufacturer’s Instruction of Terms of Service), these packaging boxes may be disposed of if there is no problem.
About Boli Optics:
Boli Optics Microscope Supplier sells professional microscopes, microscope accessories, and magnifying lamps. We offer parts and accessories compatible with Leica, Olympus, Nikon, and Zeiss, and more. We supply research laboratories, medical centers, universities, industrial manufactures, factories, and more. Our engineers and technicians provide technical support and design & manufacture custom microscope products for your applications. Our products are manufactured under ISO 9001 quality control standards. We also provide OEM service. Since 1994, our talented team has been working in the optics industry and serving our customers whole-heartedly. Based in Southern California, we offer fast, same day shipping from our local warehouses.
Visit Product PageEmail:
sales@bolioptics.com
Location:
8762 Lanyard Court,
Rancho Cucamonga
California
91730
