Barrel Bushing Drop-in Thick Flange Govt .699 OD .580 Angle Bore SS Reviews

5 Rating 7 Reviews

This is a drop-in part if your barrel measures .580".Our Thick Flange bushing is machined from solid barstock steel.The flange thickness is .125" which protects the barrel more because it sticks out farther than the spec bushing.Available in Stainless Steel and blued Carbon Steel.Please measure these two areas with calipers to find the sizes you need.Please select your options carefully.Check out our FAQ Section for instructions on how to accurately take these measurements.Angle Bore is bored on an angle or a snug fit (measurements must be precise);Straight Bore is bored straight without variation.When choosing a spring plug, choose the EGW Long Nose Spring Plug for a flush fit!
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“Dropped ring in and it definitely looks great and adds protection for the barrel crown.”

Helpful Report

Posted 3 months ago

“Fit without issue. Very tight and greatly increases lockup. Have a second on order as I write this.”

Helpful Report

Posted 1 year ago

“Installed Great, Very Happy”

Helpful Report

Posted 1 year ago

“Worked out just fine”

Helpful Report

Posted 2 years ago

“Had to do a bit of filing to allow the lug to engage and the bushing to rotate, but the overall fit is excellent. My muzzle end is now shake-free!”

Helpful Report

Posted 2 years ago

“Noticed a little bit of a lip where the angle cut met the inside diameter of the bushing. Nothing some 1000 grit sand paper and 5 minutes couldn't fix. Gave a very light inside polish to the bushing. It trying is drop in on my RIA tac ultra. Very impressed for the money.”