Login
Start Free Trial Are you a business? Click Here

Remington 740, 742, 760, Ithaca 37, Weaver 62 Picatinny Rail 0 MOA Reviews

5 Rating 41 Reviews
Read EGW Guns Reviews

Picatinny Rail for Remington 740, 742, 760 & Ithaca 37 (Weaver 62) - 0 MOA Quick Check: This Rail Fits the "Weaver 62" Pattern.
Fits: Remington Model 740, 742, 760, Weaver 62, and Ithaca Model 37. Does NOT Fit: Remington 7400, 7600, or Model 6 (These require the THIS mount).Mounting Hardware: #6-48 Screws (Included).*Note: Your receiver MUST be drilled and tapped for this mount to fit.*
Installation & Overview
(Watch our guide on how to properly torque and install your EGW rail).
Bring your classic Remington Woodsmaster or Gamemaster into the modern era. This EGW Picatinny rail is the perfect upgrade for the Remington 740, 742, 760, Weaver 62, and Ithaca 37, converting your receiver to a universal mounting platform. By replacing the old two-piece Weaver 62 bases with a solid one-piece rail, you gain the flexibility to mount virtually any scope or red dot sight with proper eye relief. Machined from domestic 6061 T6 aircraft aluminum, this rail is lightweight and rigid. The extruded center channel running down the middle of the rail reduces overall mass without sacrificing durability. The cross slots run the full length of the mount, allowing you to use modern Picatinny or Weaver-style rings. Technical Specifications
Rail Type: One Piece Picatinny (Weaver 62 Footprint) Machined From: Domestic 6061 T6 Extruded Aluminum Finish: Matte Black Anodize Center Spread: 1.652" Overall Length: 5.488" Height: 0.4" (Top of receiver to top of rail) Mounting Hardware: #6-48 X 1/4 Screws & T-10 Bit Included Torque Specs: 20 in/lbs (Blue Loctite recommended)
Remington 742 / 760 Rail FAQ
Will this fit my Remington 7400 or 7600?
No. The 7400 and 7600 use larger #8-40 screws and a wider hole spacing (Weaver 93 pattern). You need our specific 7400/7600 mount for those rifles.
Is my rifle drilled and tapped?
Many older Remington 740s, 742s, and 760s were not drilled and tapped at the factory. Please check the top of your receiver. If you see 4 screw holes (or plug screws), this rail will fit. If the top is smooth, you will need a gunsmith to drill and tap it for you.
Will this fit an Ithaca 37?
Yes, but only if your Ithaca 37 is drilled and tapped for the Weaver 62 pattern (often found on "Deerslayer" models). Standard Ithaca 37s are usually not drilled and tapped.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951

“Great fit”
Helpful Report
Posted 1 week ago
“it work perfect, for my REM 742 auto. Scew holes matched up perfectly . Thank you.”
Helpful Report
Posted 2 weeks ago
“Great mounting device!”
Helpful Report
Posted 1 month ago
Author didn't leave any comments.
Helpful Report
Posted 1 month ago
“Easy transaction, perfect fit!”
Helpful Report
Posted 1 month ago
“Worked great”
Helpful Report
Posted 1 month ago
“When I was 14 I bought a used Remington 760 in .308 and harvested a good many deer through the 80’s and 90’s. I then bought a Ruger 7MM Remington Mag and the .308 sat for some time. Now that I am 55 I am going to get the old .308 back out. I upgraded the gun with a new EGW Picatinny Rail and EGW Keystone High Rise 30 MM Rings. Is it overkill….. Absolutely. The gun smith that mounted the scope was looking to do the same to his 760 30-06 and took the all the contact info to do the same. I can’t wait to get it out in November!!”
Helpful Report
Posted 3 months ago
“Tight fit, no gaps and all mounting holes were in correct location. Great look and will make adjustments a whole lot easier”
Helpful Report
Posted 5 months ago