Login
Start Free Trial Are you a business? Click Here

Browning T-Bolt Picatinny Rail 0 MOA Reviews

4.7 Rating 22 Reviews
Read EGW Guns Reviews

This mount comes standard with a bevel on both sides making it ambidextrous.
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). We recommend: 0 MOA - if shooting 0-500 yards 20 MOA - if shooting 500-1000 yards
When zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951

“The picatinny rail conforms well to a newly purchased Browning T Bolt rifle's curved mating surface. Thought past reviews from other customers getting mounting screws that were too large in diameter must of been a isolated mistake but on arrival in October of 2026 of a new Browning T Bolt rifle and this picatinny rail advertised to fit the new gun and the screws were too large in diameter (advertised also as too long requiring grinding off excess screw length interfering with bolt be required). Took my rifle into local gun shop an spent $9 to get smaller #6-48 (threads/inch) screws that had tapered head that mated well with the rails four counter sunk mounting holes. The length I selected was shown as 3/16 long because countersink screws set deeper into the counter sunk rail holes. After final assembly the threaded screw ends stayed approximately 1/16 inch shy of touching the T Bolt movement path. Nice to get some screws that fit the factory threaded holes and not needlessly grinding off 4 screws that would be too long and protruding inside the bolt bore just above the trigger & breach. Possibly older Browning T Bolt rim fire rifles used bigger diameter scope mounting screws through holes, but if you are purchasing a new rim fire T Bolt rifle be aware that the threaded through holes in my new one were #6-48. E”
Helpful Report
Posted 3 weeks ago
“Great product. I really wish they made an extended one with 2-3 more slots forward of the action cut out. . I can’t move my scope any further forward because of the control knob housing. It is a large scope. I have to pull my cheek back on the stock for a clear view.”
Helpful Report
Posted 3 months ago
“The EGW rail added the height required to allow a 44 mm scope bell to clear the barrel on my T-Bolt Target. I have the Browning low scope rings, they are ok if you stick with less than 40 mm of scope, but on my 17 HMR, I wanted more scope. The EGW rail made mounting a larger scope possible, while still keeping the scope low enough to allow for a good cheek weld and easy eye alignment. Not to mention the fact that it cost less than the Browning rings. This is my second EGW rail, the other is on a Savage Revel, and that one is also a solid upgrade.”
Helpful Report
Posted 5 months ago
“The picatinny rail fit great and it was a good price. The shipping was fast.”
Helpful Report
Posted 8 months ago
“Arrived quickly and fit perfectly”
Helpful Report
Posted 8 months ago
“For the money, you can’t beat the EGW picatinny rail. Shippe quickly.”
Helpful Report
Posted 11 months ago
“Need to return but can't get throughout.”
Helpful Report
Posted 1 year ago
“Great item. Well made and fit perfectly on the rifle. Definitely will do business with again.”
Helpful Report
Posted 1 year ago