This mount works with:Flat Top Ruger M77'sThis mount DOES NOT work with:Older model Ruger M77's with rounded recievers Machined from: Domestic 6061 T6 Extruded AluminumFinish: Matte BlackMounting Hardware: Hex head screws and wrench providedCenter Spread: 4.215"Overall Length: 6.670"This mount is sold DRILLED for 8-40 screws and is available in a 0 or 20 MOA and is specifically made to fit the Ruger M77. This Evolution Gun Works - EGW mounts will require you to drill and tap your receiver. This mount comes standard with a bevel on both sides making it ambidextrous.We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability. Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Visit Product PageLocation:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
