HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
Mounting hardware is included. This is a press fit mount. Utilization of a sight pusher tool may be required.
This mount fits:S&W Model 41This mount does not fits:This Red Dot Plate does not fit all S&W Model 41 dovetails. Please verify that you have the correct dovetail before purchasing. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 Button Head Screws - Requires 5/64 Wrench or Driver (2) 6-32 Flat Head Screws - Requires 5/64 Wrench or Driver (1) 6-32 x 3/16 Cup Point Set Screw - Requires 1/16 Wrench or Driver Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom ( Not Enclosed )
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.Click here to see a video from Vortex on how to install our red dot base on a slide. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
