HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
**Requires second screw hole to be drilled and tapped if using on 2020 or newer Colt Python**
Mounting Hardware is Included WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. This mount fits:Colt Anaconda (fits 2020 and newer models)Colt Python (fits 2020 and newer models if the second screw hole is drilled and tapped in the top strap) Torque 6-40 x 3/8 mounting screw to 20 in/lbsTorque 4-48 x 3/8 mounting screw to 10 in/lbsTorque 6-32 red dot mounting screws to 15 in/lbs Some newer Pythons are only drilled and tapped for one screw on the top strap, if your gun only has one hole on the top strap, this mount WILL NOT WORK. This is for Colt models with the Elliason style adjustable rear sight.
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 x 5/16" Button Head Screws - Requires 5/64 Wrench or Driver(2) 6-32 x 3/8" Flat Head Screws - Requires 5/64 Wrench or Driver(1) 6-40 X 3/8 Mounting Screw (to mount the plate to the frame)(1) 4-48 X 3/8 Mounting Screw (to mount the plate to the frame) Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom ( Not Enclosed )
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
The mounting screws require a 5/64" wrench and the set screws (when applicable) require a 1/16" wrench.*All ADE mounts require 6-32 x 3/8" screws.Please note: We have found that some red dots commonly found on Amazon such as the UTG and ADE may not hold the same tolerances as the red dots that this mount was initially created to work with. These dots may not fit properly on the posts on the plate. We would recommend either sending the red dot back for an exchange to whichever seller you purchased it from, or open up the holes in the bottom of the red dot to accommodate the pins.
Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
