HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
Mounting Hardware is IncludedWE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.This mount fits:Tristar Shotguns (factory drilled and tapped) Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Hole Spacing: 1.18"Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 x 5/16" Button Head Screws - Requires 5/64 Wrench or Driver(2) 6-32 x 3/8" Flat Head Screws - Requires 5/64 Wrench or Driver(2) M4 x .7 x 8mm Flat Head Screws - Requires use of 2.5mm Hex Key Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom ( Not Enclosed )
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
The EGW red dot sight mount adapter plates for the Tristar shotguns are meant to be installed in place of the factory scope mount. Simply remove the scope mount on your gun and replace it with our mount in order to mount your Vortex Viper, Vortex Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace factory rail at any time. Mounting hardware included.Installation Instructions- Remove the factory rail- Install the EGW Sight Mount on the receiver- Torque mounting screws to 15in/lbs- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs (2) 6-32 Button Head Screws - Requires use of 5/64" Hex Key Provided for Vortex Viper and Venom Sights(2) 6-32 Flat Head Screws - Requires use of 5/64" Hex Key Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.Click here to see a video from Vortex on how to install our red dot base on a slide. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
