HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
This mount fits:
Zev slides factory cut for the RMR platform with the threaded posts (shown in the image below). Will work with Wuelf slides. If your gun has a cut out for the optics plate, this plate will work with your application.The screws to mount the red dot to the plate are provided at no extra cost. We recommend using 15 in/lbs.
Specifications Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: Overall Width: Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 Button Head Screws(2) 6-32 Flat Head ScrewsThis mount requires a 5/64" and 1/16" wrench for installation. Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
The EGW red dot sight mount adapter plates for the RMR Cut Zev Slides are meant to be installed directly on the slide. Simply remove the sight plate on your gun (if applicable) and replace it with our mount in order to mount your Vortex Viper, Vortex Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear cover plate- Install the EGW sight mount and torque the mounting plate screws- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque red dot mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
