HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTER FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
HK VP9 Optics Ready Plate #5 | Fits Vortex Venom, Viper, Burris FastFire & Docter
Quick Check: HK VP9 OR Plate #5 Equivalent. Fits: HK VP9 Optics Ready ModelsFootprint: Docter / Vortex / Burris FastFireComparable To: HK VP9 Optics Ready Plate #5Material: 7075 Aluminum
The EGW red dot sight mount adapter plate for HK VP9 Optics Ready models installs directly into the factory optics cut, allowing you to mount red dots using the Docter / Vortex / Burris FastFire footprint.
Simply remove the factory plate cover and replace it with the EGW mount to install optics like the Vortex Venom (Open Emitter), Vortex Viper, Burris FastFire, Viridian RFX25, and other compatible red dots.
This mount is compatible with HK VP9 Optics Ready, HK VP9L Optics Ready, HK VP9 Tactical Optics Ready, and other VP9 optics-ready models using the same factory slide cut.
Comparable to the HK VP9 Optics Ready Plate #5, this mount provides a strong, low-profile mounting solution machined from American-made 7075 aluminum and finished in matte black hardcoat anodizing.
Learn more about optic footprints: RMR vs Docter vs RMSc Footprints Guide
Technical Specifications
Mount Type: HK VP9 Optics Ready Adapter Plate
Comparable To: HK VP9 Optics Ready Plate #5
Material: 7075 Aluminum
Coating: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Red Dot Torque: 15 in/lbs
HK Recommended Plate Torque: 2Nm / 17.7 in/lbs
Made in USA
Compatible Pistols
HK VP9 Optics Ready
HK VP9L Optics Ready
HK VP9 Tactical Optics Ready
Other HK VP9 Optics Ready Models
Compatible Red Dots
Viridian RFX25
Vortex Viper
Vortex Venom (Open Emitter)
Burris FastFire 1
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
Mounting Hardware Included
(2) 6-32 x 3/8" Flat Head Screws
(2) 6-32 x 5/16" Button Head Screws
Optional Replacement Slide Screws
M4 x 0.7 x 8mm Long Torx Plus Screws available for an additional charge
Why Choose This HK VP9 Optics Ready Plate?
Direct fit for HK VP9 Optics Ready models
Comparable to HK VP9 Plate #5
Expands compatibility to Docter footprint optics
Low-profile mounting solution
Precision machined from 7075 aluminum
Made in the USA by EGW
Installation Notes
Remove the factory rear cover plate
Install the EGW sight mount into the factory optics cut
The factory plate mounting screws may be reused
HK recommends replacing plate mounting screws after 2,000 rounds
Torque plate mounting screws to 2Nm / 17.7 in/lbs
Place the red dot sight onto the mount
Apply blue Loctite to the optic screws
Torque optic mounting screws to 15 in/lbs
Important Fitment Information
This mount fits HK VP9 Optics Ready models only and is comparable to the HK VP9 Optics Ready Plate #5. Verify your pistol uses the factory optics-ready slide cut before ordering.
Warning: This product may contain trace amounts of lead. For more information, visit www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
