HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
This is a press fit mount. Utilization of a sight pusher tool may be required.
This mount fits:
CZ 75 Shadow CZ 75 SP01 Shadow CZ Shadow 2
This mount does not fit:
Shadow 2 Optics Ready Shadow 2 Kadet Dan Wesson DWX Dan Wesson DWX Compact
EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Torque Specs: 15 in/lbs Mounting Hardware:(2) 6-32 Button Head Screws(2) 6-32 Flat Head Screws(1) 6-32 Set Screw Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom ( Not Enclosed )
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation. WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov. Click here to see a video from Vortex on how to install our red dot base on a slide.
Alt Description:
CZ 75 Shadow Vortex Venom Mount CZ 75 SP01 Shadow Vortex Venom Mount CZ Shadow 2 Vortex Venom Mount Dan Wesson DWX Vortex Venom Mount Dan Wesson DWX Compact Vortex Venom Mount CZ 75 Shadow Red Dot Mount CZ 75 SP01 Shadow Red Dot Mount CZ Shadow 2 Vortex Red Dot Mount Dan Wesson DWX Red Dot Mount Dan Wesson DWX Compact Red Dot Mount CZ Shadow 2 Red Dot Mount CZ shadow 2 optic mount Shadow 2 optic mount CZ shadow 2 dovetail mount
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
