HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTER FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
SIG Sauer P220 / P226 / P229 / P320 Red Dot Mount – Fits Vortex Venom (Open Emitter), Viper, Burris FastFire & Docter Footprint Optics
Quick Check: SIG Sauer Rear Sight Dovetail Red Dot Mount. Fits: Many SIG Sauer pistols with standard rear sight dovetails including P220, P226, P229 and P320 models.Mounting Hardware Included: Yes.Optic Footprint: Docter / FastFire / Viper / Venom compatible.Installation: Press fit mount. Sight pusher may be required.
Installation & Overview
The EGW SIG Sauer red dot mount allows you to mount popular Docter footprint optics directly to your pistol by replacing the factory rear sight. This mount is designed for many non-optics-ready SIG Sauer pistols and provides a low-profile optics mounting solution without permanently modifying the slide.
Compatible with optics like the Vortex Venom (open emitter), Vortex Viper, Burris FastFire series, and other Docter footprint red dots, this mount keeps the optic positioned lower than many Picatinny rail adapter systems for improved sight acquisition and a cleaner overall appearance.
Machined in the USA from high-strength 7075 aluminum and finished with a matte black hardcoat anodizing, this mount is designed to withstand hard use while maintaining a precise fit in the slide dovetail.
This mount is designed to install from left to right with the muzzle facing forward. The dovetail features a progressive taper to allow easier installation while still maintaining a secure fit.
This mount does not work with any optics ready SIG Sauer pistols.
Due to manufacturing tolerances between firearms, minor fitting may be required.
Learn more about optic footprints: RMR vs Docter vs RMSc Footprints Guide
Technical Specifications
Material: 7075 Aluminum
Finish: Matte Black Hardcoat
Overall Length: 1.811"
Overall Width: .99"
Mounting Style: Rear Sight Dovetail Replacement
Made In: USA
Compatible Firearms
SIG Sauer P210A Standard
SIG Sauer P220
SIG Sauer P224
SIG Sauer P225
SIG Sauer P225-A1
SIG Sauer P226
SIG Sauer P227
SIG Sauer P228
SIG Sauer P229
SIG Sauer P238
SIG Sauer P239
SIG Sauer P245
SIG Sauer P320
SIG Sauer P938
SIG Sauer SP2022
SIG Sauer M11-A1
SIG Sauer MK25
Bersa Thunder UC Series (9/40/45)
Bersa Thunder HC Series (9/40/45)
FN 509
SIG Sauer #8 Sight Cuts
Does Not Fit
SIG Sauer 1911 Pistols
SIG Sauer P220 10mm Hunter
Any Optics Ready SIG Sauer Pistol (P320 X-Carry, P226 Legion RX, P229 RX, etc.)
SIG Sauer P210 Target
SIG Sauer P365
FN 509 Tactical
Compatible Red Dots
Viridian RFX25
Vortex Viper
Vortex Venom (Open Emitter)
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
Why Choose This EGW Mount?
No permanent slide modification required
Lower optic height than Picatinny rail adapter setups
Precision machined from 7075 aluminum
Designed specifically for SIG Sauer rear sight dovetails
Compatible with many popular Docter footprint optics
Made in the USA
Mounting Hardware Included
(2) 6-32 x 3/8 Flat Head Cap Screws
(1) 6-32 x 3/16 Cup Point Set Screw
(2) 6-32 x 5/16 Button Head Screws
Installation Instructions
Remove the factory rear sight
Install the EGW Sight Mount into the dovetail from left to right
Tighten the set screw if applicable
Place the optic onto the mount
Apply blue Loctite to mounting screws
Torque mounting screws to 15 in/lbs
The included screws require a 5/64" Allen wrench for installation.
Fitment Notes
This is a press fit mount. Utilization of a sight pusher tool may be required.
This mount does not work with any optics ready SIG Sauer pistols.
Due to manufacturing tolerances between firearms, minor fitting may be required.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Click here to see a video from Vortex on how to install our red dot base on a slide.
Alt Description:
SIG P220 Vortex Venom Mount
SIG P226 Vortex Venom Mount
SIG P229 Vortex Venom Mount
SIG P320 Vortex Venom Mount
SIG P220 Red Dot Mount
SIG P226 Red Dot Mount
SIG P229 Red Dot Mount
SIG P320 Red Dot Mount
Warning: This product may contain trace amounts of lead. For more information, visit www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
