HAVE AN AIMPOINT ACRO? USE THIS PLATE TO ADAPT THE DOCTOR FOOTPRINT TO THE AIMPOINT ACRO FOOTPRINT
Mounting Hardware is Included WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. This Mount Fits:Camp Carbine 9mm (does not fit the early models, the hole spacing is different)Camp Carbine 45Glenfield 30Henry Big Boy (H006)Henry 3030 (H009)Henry 4570 (H010)Henry Big Boy (H012)Henry Long Ranger (H014)Henry .410 (H018) Only fits the 20" BarrelHenry Side Gate Lever Action (H024)Henry Long RangerHenry Homesteader (must use rear holes on receiver) Marlin 1895Marlin 1894Marlin 336Marlin 375Marlin 444Marlin Model 36Ruger PC Carbine*Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.831"Overall Width: 1.062"Mounting Hardware: (2) 8-32 Button Head Screws, (3) 6-48 Torx Screws Red Dot Fitment:
Viridian RFX25
Vortex Viper
Vortex Venom ( Not Enclosed )
Burris FastFire
Burris FastFire 2
Burris FastFire 3
Burris FastFire 4
Docter
ADE RD3-001
ADE RD3-002
ADE RD3-009
UTG Reflex Micro Dot
Crimson Trace CTS-1200
Crimson Trace CTS-1300
Sightmark Mini Shot
Cuda RX-795
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Viper/Venom, Burris FastFire, or Docter red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter SightsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
