Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Red Dot Mount For Mount for m&p shield ez Reviews

4.3 Rating 6 Reviews

Mounting Hardware is Included WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. This mount fits:
S&W M&P Shield EZ .380 ACP S&W M&P Shield EZ 9mm
This mount does not fits:
S&W M&P S&W M&P 2.0 S&W M&P 22
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.78"Overall Width: 1.1"Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Vortex Defender Series (Defender XL requires the screws provided by Vortex) Vortex Venom (Enclosed Red Dot) OSight SE Bushnell RXS-100 Crimson Trace CTS-1500 Holosun 407K* Holosun 407k-GR Holosun 507K* Holosun 507k-GR Holosun EPS-GR* Holosun EPS-RD* Holosun EPS-Carry-GR* Holosun EPS-Carry-RD* Jpoint Leupold Delta Point Pro Optima Redfield Accelerator Shield RMS Shield RMSc Shield SMS Sig Romeo Zero
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbsModification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Alt Description:
m&p shield ez 9mm red dot sight m&p shield ez red dot holosun 507k dovetail mount m&p shield red dot mount shield ez red dot holosun 507c on m&p shield ez m&p shield red dot

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“The site did say to consult a gunsmith and to use a site adjustment tool. I used a brass punch to set mine up.That left a little brass 'bruise'. I'm ok with that. The provided screws bottomed out before tightening. That's when I did go to the gunsmith. He shortened them, put on blue loctite and torqued them correctly all for $ 15. So I'm happy.”

Helpful Report

Posted 3 weeks ago

“This mount fits perfectly with my S&W M&P Shield EZ pistol! I highly recommend to anyone with this gun.”

Helpful Report

Posted 3 months ago

“I was concerned about how solid your mount would be on My Shield Ez which requires a press-fit installation. Was satisfied that it is more solid than anything held in place by screws alone.”

Helpful Report

Posted 7 months ago

“As alwaysir EGW helped me find the proper dovetail mount for my PC S*W Shield EZ. Minor filing and it was on the guie took it out to shoot but even with their help Im still a poor shot. Not the gun or equiptment fault. Just old age and tremors. If you need a mount call them. they can help.”

Helpful Report

Posted 1 year ago

“The Dovetale for the mount is too large for the shield ez 380, normally the dovetale will slide in loose then be held in place by the screw on the underside of the slide. However the dovetale was too tight, and when I attempted to install it using a sight pusher tool, it still would not fit, and I damaged the mount and my sight pusher tool.”