Login
Start Free Trial Are you a business? Click Here

Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Red Dot Mount For Vortex Spitfire Gen ll 5x Reviews

4 Rating 2 Reviews
Read EGW Guns Reviews

MUST REUSE FACTORY COVER PLATE SCREWS TO SECURE ADAPTER PLATE
This Mount fits:
Vortex Spitfire HD Gen II 5x
Does NOT work with RMRcc
Specifications
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.95"Overall Width: .99"Mounting Hardware: (2) 6-32 Flat Head Screws to mount the red dot to the plate
Red Dot Fitment:
   
Vortex Defender Series (Defender XL requires the screws provided by Vortex)
Vortex Venom (Enclosed Red Dot)
OSight SE
Bushnell RXS-100   
Crimson Trace CTS-1500   
Holosun 407K*
Holosun 407k-GR
Holosun 507K*
Holosun 507k-GR
Holosun EPS-GR*   
Holosun EPS-RD*   
Holosun EPS-Carry-GR*   
Holosun EPS-Carry-RD*   
Jpoint   
Leupold Delta Point Pro   
Optima   
Redfield Accelerator   
Shield RMS   
Shield RMSc   
Shield SMS   
Sig Romeo Zero
Simply remove the plate on your HD Spitfire Gen II 5x and replace it with our mount in order to mount your Holosun K Series. You can take our mount off and replace the cover plate at any time. Red dot mounting hardware included.Installation Instructions- Remove the cover plate- Install the EGW sight mount and torque the mounting plate screws- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque red dot mounting screws to 15in/lbs
*When re-using the factory cover plate screws, some customers have run into issues with them bottoming out. We have found that the bottom finger of the helicoil inside the theads on the spitfire may be contacting the screw, preventing it from threading in all the way.  If you carefully push the finger down and to the side, that should allow the screw to thread all the way in. You can also remove about .010" of material from the bottom of the screw to allwo it to seat. 
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951

“To be honest, the two countersunk screws were not drilled deep enough and when mounting the sight it was stressed enough to shatter the rear lens. I machined the bores, shortened the screws, and Vortex is replacing the sight because of the warranty they offer. It will be perfect when everything is remounted. Still an excellent solution to the issue of mounting the sight to the spitefire. Thank you for reaching out and we are still satisfied with the outcome to come.”
Helpful Report
Posted 1 week ago
Hello Thomas, We're sorry to hear about the difficulties you experienced during installation and the damage to your optic. The screws included with our mount are intended to secure the red dot sight to the mount, not to attach the mount to the Vortex Spitfire. To secure our mount to the Spitfire, you should reuse the factory screws that originally held the cover plate in place. When installed using those screws, no modifications should be necessary. We're glad to hear Vortex is taking care of the damaged optic under warranty, and we appreciate you taking the time to share your experience. Kind regards, EGW
Posted 6 days ago
“The plate fit on the Spitfire perfect. I had to trim about 1/16 inch off the screws to mount the Defender, but not a problem. Would recommend.”
Helpful Report
Posted 9 months ago