Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Mount for CZ 75, 75 SP-01 Phantom, 85, 97, P01, and PCR Reviews

4.7 Rating 13 Reviews

This mount fits:CZ 75CZ 75BCZ 75 SP-01CZ 75 SP-01 PhantomCZ 75 SP-01 Shadow*CZ 85CZ 97BCZ 97DCZ P-01CZ PCR (there will be a gap under the front of the adapter plate)Tristar P120 This mount does not fit:CZ P-07CZ P-09 *We have found that our mount may work with some models of the 75 SP-01 Shadow and may not work with others. Please measure the depth of the dovetail cut from the front of your slide. If the depth measures .133", our mount will not be a drop in part for your application. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.604"Overall Width: .99"Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Vortex Defender SeriesBushnell RXS-100Crimson Trace CTS-1500Holosun 407K*Holosun 407k-GRHolosun 507K*Holosun 507k-GRHolosun EPS-GR*Holosun EPS-RD*Holosun EPS-Carry-GR*Holosun EPS-Carry-RD*JpointLeupold Delta Point ProOptimaRedfield AcceleratorShield RMSShield RMScShield SMSSig Romeo Zero Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“I needed to file down the 2 rear tabs as instructed. Super easy with a dremel using asanding wheel. I have other adapter for different footprints, 1 of which I purchased from you. Very low profile for being a dovetail adapter. Thanks guys for supporting our needs.”

Helpful Report

Posted 2 years ago

“Look's great snug fit. Will get others.”

Helpful Report

Posted 2 years ago

“I used this on a CZ P0-1 Omega to mount a Holosun 507k. It works very well after my gunsmith ground off 2 of the four raised parts of the plate to match the footprint.”

Helpful Report

Posted 3 years ago

“Took a little doing to get this mount installed but that’s no fault of the mount and only lends itself to a snug fitting platform for the dot to sit upon. I’ve only got a couple hundred rounds through the system at this point but this far it’s been flawless and I can’t see any reason why that would change. Good product, does what it should and works very well”