Login
Start Free Trial Are you a business? Click Here

Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Mount for HK VP9 | VP9SK | P30 | P30L | P30SK | HK45 | HK45C Reviews

4.8 Rating 9 Reviews
Read EGW Guns Reviews

This Mount Fits:
H&K VP9 H&K VP9SK H&K VP40 H&K P30 H&K P30L H&K P30SK H&K 45 H&K 45C
This mount does not fit:
HK USP Any Optics Ready H&K Pistol
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.604"Overall Width: .99"Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Vortex Defender SeriesBushnell RXS-100Crimson Trace CTS-1500Holosun 407K*Holosun 407k-GRHolosun 507K*Holosun 507k-GRHolosun EPS-GR*Holosun EPS-RD*Holosun EPS-Carry-GR*Holosun EPS-Carry-RD*JpointLeupold Delta Point ProOptimaRedfield AcceleratorShield RMSShield RMScShield SMSSig Romeo Zero Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Had to make a slight adjustment to make it fit properly but other than that good product would buy again
Helpful Report
Posted 1 year ago
This is my sixth plate from EGW, they have all been flawless. This last one with the DeltaPoint for a VP9 SK. Had two little shims for the Leupold .which really made a tight fit, even my gunsmith says good things about EGW plates, although this one I did myself.
Helpful Report
Posted 2 years ago
Fit great, no shimming needed. Very good construction. It's held my optic in place flawlessly for the 500 rounds I've run through it so far.
Helpful Report
Posted 2 years ago
Perfect fit on my HK45T and HK45CT! Highly recommend.
Helpful Report
Posted 2 years ago
Worked well for eotech red dot sight
Helpful Report
Posted 2 years ago
Bot this for my HKP30SK; mounted a Romeo ONE. GREAT!!! is my EDC and the BIG dot is easy to find. Thank you EGW!!
Helpful Report
Posted 3 years ago
Fit perfect; easy install
Helpful Report
Posted 3 years ago
This mounting plate is precise and slides into the rear sight position perfectly if you have a decent pusher. The rear pins had to be modified for my 507K, but that was easily accomplished with a drill press. I take away 1 star just because I had to modify the plate. The company knows that some of us need to modify so why not just make one without rear pins? Aside from that one criticism, you won't be disappointed in the quality.
Helpful Report
Posted 3 years ago