Login
Start Free Trial Are you a business?? Click Here

Holosun K Series (fits Vortex Defender Series, Shield RMSC/RMS/SMS, Leupold DeltaPoint Pro) Mount for Novak Reviews

4.3 Rating 42 Reviews
Read EGW Guns Reviews

Our red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install.Simply remove the rear sight on your gun and replace it with our mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Our products should be installed and checked by a qualified and competent gunsmith.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Minor modification to the sight base may be necessary for some 1911s including Rock Islands, Citadels, and GSG 1911 .22s. Click here to see a video from Vortex on how to install our red dot base on a slide. Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.604"Overall Width: .99"Mounting Hardware: (2) 6-32 Button Head Screws Red Dot Fitment: Vortex Defender SeriesBushnell RXS-100Crimson Trace CTS-1500Holosun 407K*Holosun 407k-GRHolosun 507K*Holosun 507k-GRHolosun EPS-GR*Holosun EPS-RD*Holosun EPS-Carry-GR*Holosun EPS-Carry-RD*JpointLeupold Delta Point ProOptimaRedfield AcceleratorShield RMSShield RMScShield SMSSig Romeo Zero This mount fits (including but not limited to):
CZ 75 Bull Shadow STI with fixed rear sights STI Marauder Christensen Arms 1911 Colt Delta Elite 10mm (2016 and newer) Ruger SR 1911 (fixed rear sight) Sig Sauer Nightmare Citadel 1911s Springfield Armory 1911 EMP - 9mm / .40 Springfield Armory 1911 EMP 4" Lightweight Champion - 9mm / .40 Springfield Armory 1911 EMP 4" Conceald Carry Contour Model - 9mm / .40 Springfield Armory 1911 Champion Operator Lightweight - .45 Springfield Armory 1911 Range Officer Compact - 9mm / .45 Springfield Armory 1911 Range Officer Champion - 9mm / .45 Springfield Armory 1911 Range Officer Elite Compact - 9mm / .45 Springfield Armory 1911 Range Officer Elite Champion - 9mm / .45 Springfield Armory 1911 Range Officer Elite Operator - 9mm / .45 Springfield Armory 1911 Loaded (Fixed Rear Sight) - .45 Springfield Armory 1911 TRP Rock Island TCM Rock Standard MS HC Combo - 22TCM/9MMTCM Rock Island TAC Ultra FS Combo - 22TCM/9MMTCM Rock Island Rock Ultra FS Combo - 22TCM/9MMTCM Rock Island TAC Ultra FS HC Combo - 22TCM/9MMTCM Rock Island TAC Ultra MS HC Combo - 22TCM/9MMROCK Rock Island Ultra CS-LTCM Rock Standard FS HC Combo - 22TCM/9MMROCK Rock Island Ultra CCO Rock Island TAC Ultra FS HC - 45 ACP Rock Island TAC Standard FS - 45 ACP Rock Island TAC Ultra FS HC - 9MM Rock Island TAC Ultra FS - 45 ACP Rock Island TAC Ultra CS - 45 ACP Rock Island TAC Ultra CS - 9MM Rock Island TAC Ultra FS - 10MM Rock Island TAC Ultra MS - 10MM Rock Island Rock Standard FS - 45ACP Rock Island M1911-A1 FS Tac Rock Island Rock Ultra CS - 45 ACP Rock Island Rock Ultra CS-L Rock Island Rock Standard MS - 45ACP Rock Island Rock Ultra CCO Rock Island Rock Standard FS - 9MM Rock Island Rock Standard CS - 45 ACP Rock Island Rock Ultra FS - 9MM Rock Island Rock Ultra FS - 10MM Rock Island Rock Standard FS 2-TONE - 45 ACP Rock Island Rock Ultra MS - 10MM Rock Island Rock Standard FS MATTE NICKEL - 45 ACP Rock Island Rock Ultra FS - 40 S&W Rock Island Rock Ultra FS - 45 ACP Rock Island Rock Ultra FS HC - 10MM Rock Island Rock Ultra MS - 45 ACP ATI GSG 1911 .22 ATI GSG 1911 Target ATI GSG 1911 HGA ATI GSG 1911 CA Compliant ATI GSG 1911 ADOP Iver Johnson Hawk 45 Matte Iver Johnson Hawk 45 Matt NS Iver Johnson Hawk 9 Matte Iver Johnson 9 Matte NS Iver Johnson Hawk Polished Iver Johnson Hawk Polished NS Iver Johnson Thrasher Polished 45 Iver Johnson Thrasher Polished 45 NS Iver Johnson Thrasher Polished 9 Iver Johnson Thrasher Polished 9 NS Iver Johnson Thrasher Polished 40 Iver Johnson Thrasher Polished 40 NS Iver Johnson Thrasher CHR45 Iver Johnson Thrasher CHR45 NS Iver Johnson Thrasher CHR9 Iver Jackson Thrasher CHR9 NS Iver Johnson Hawk Digital Navy NS Iver Johnson Hawk O.D. Green Iver Johnson Hawk O.D. Green NS Iver Johnson Hawk Coyote Tan Iver Johnson Hawk Coyote Tan NS Iver Johnson Thrasher SS 45 Iver Johnson Thrasher SS 45 NS Iver Johnson Thrasher SS 9 Wilson Combat Supergrade Commander Special Wilson Combat Tactical Carry Compact Wilson Combat Tactical Supergrade Wilson Combat Tactical Supergrade Compact Wilson Combat Tactical Supergrade Professional Wilson Combat Tactical Carry Wilson Combat Tactical Carry Professional Wilson Combat Tactical Elite Wilson Combat Vickers Elite Wilson Combat Vickers Elite Commander Wilson Combat X-Tac Wilson Combat X-Tac Compact Wilson Combat X-Tac Elite Wilson Combat X-Tac Elite Carry Comp Pro Wilson Combat X-Tac Elite Professional Wilson Combat X-Tac Professional Wilson Combat X-Tac Elite Compact Wilson Combat X-Tac Elite Carry Comp Wilson Combat Protector Wilson Combat CQB Wilson Combat CQB Elite Wilson Combat CQB Tactical LE Wilson Combat CQB Light-Rail Lightweight Wilson Combat Ultralight Carry Wilson Combat Ultralight Carry Commander Wilson Combat Ultralight Carry Professional Wilson Combat Ultralight Carry Compact Wilson Combat Ultralight Carry Sentinel Wilson Combat ULC Commander Compact Wilson Combat Carry Comp Wilson Combat Carry Comp Professional Wilson Combat Hackathorn Special Wilson Combat Hackathorn Special Commander Wilson Combat Tactical Elite Wilson Combat EDC X9 Wilson Combat EDC 9 Compact Wilson Combat EDC 9 Professional Wilson Combat Protect Professional Wilson Combat Elite Professional Wilson Combat Professional Wilson Combat Professional Lightweight Wilson Combat Professional LR-LW Wilson Combat Bill Wilson Carry Wilson Combat Protector Compact Wilson Combat CQB Compact Wilson Combat CQB LR-LW Compact Wilson Combat CQB Commander Wilson Combat CQB Commander Compact Wilson Combat Sentinel Compact Wilson Combat Stealth Wilson Combat MS Sentinel Wilson Combat Sentinel Wilson Combat Sentinel Compact Wilson Combat Sentinel Professional Wilson Combat Super Sentinel Wilson Combat Sentinel XL
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Own several of these optic plates over the years. They're a great product. 4 of them have been on for 1000's of rounds, no problems. Buy yourself one!
Helpful Report
Posted 1 week ago
Installed the mount on a 1911 RockIsland 9mm With a little patience and a small knife blade file It fits perfectly and the 507k went right on, sighted in and all ready
Helpful Report
Posted 3 weeks ago
I just ordered a 2nd mount,same one. All the finish came off your mount during installation. I used brass punches and still damaged the mount. I wasn't aware I'm going need to sand your mount so it fits my colt defender.
Helpful Report
Posted 2 months ago
Thank you for your feedback, and we’re truly sorry to hear about the issue you experienced with our red dot adapter mount. We understand your frustration, and we sincerely apologize that the coating came off during installation. We want to clarify that our mount's coating is not designed to withstand the force of repeated impacts with a brass punch. While we strive to make our products as user-friendly as possible, the installation process can sometimes require a bit of fitting. Due to manufacturing tolerances, our mounts may not always be a perfect drop-in fit, and in those cases, some minor fitting with a file may be necessary to ensure a secure and smooth installation. After the mount has been fit it can typically be installed with a rear sight pusher tool. To ensure the best results and avoid damage to the mount or firearm, we always recommend having a qualified gunsmith install our parts, especially when additional fitting is required. Gunsmiths are experienced with these kinds of adjustments and can help ensure your mount is installed properly without causing any damage to the finish. Again, we’re sorry for the inconvenience, and we hope this helps clarify the situation. We value your business and appreciate your understanding. If you have any further questions or concerns, please don’t hesitate to reach out.
Posted 2 months ago
needed m inor filing and fit perfectly in dovetail with min imal difficulty
Helpful Report
Posted 2 months ago
Perfect fit. Easy installation. Quick delivery.
Helpful Report
Posted 2 months ago
The mount fit just fine however none of the screws will work in attaching my Bushnell RXS-100 Sight. They are to long or to short.
Helpful Report
Posted 3 months ago
Thanks for the Review. Im sorry that you ran into issues with the screws. On the parts page when you are selecting the mount, it asks if you have a Bushnell dot, if you select YES we will send an additional set of screws for that dot. It looks like you selected that option on your order, there should have been 3 sets of mounting screws that you received. It looks like the screws in the picture are the screws for the Deltapoint Pro and not the Bushnell dot. The DPP screws have the un-threaded shoulder at the top like in the picture, there will be another set of button head screws which are for other dots, and finally a set of Socket Head Cap Screws, the head will look much different than the other two. Those screws are the correct screws for your optic. If for some reason you did not receive the screws, contact customer support and we will make sure you get some.
Posted 3 months ago
The mount required fitting. It cannot be installed in the dovetail (Novak) without careful fitting and a lot of force to drive it home.
Helpful Report
Posted 3 months ago
Thanks for leaving us a review, im sorry to hear that you ran into some issues installing our mount. Since we manufacture the bases and not the slides, there is always a variance in tolerances. Some mounts install with just a little force, others need to be fit and filed. This is all a case by case basis. We live on the larger side of tolerances that way the mounts can always be fit to the slide, rather than having it be too small on some slides and then you can not mount a dot. Due to this we always recommend our parts be installed by a qualified gunsmith.
Posted 3 months ago
Took a ton of milling to get it to fit
Helpful Report
Posted 4 months ago