Mounting Hardware is Included
This mount fits:
Elite Stock II with adjustable (LPA/Bomar style, shown above) rear sight
Elite Stock III with adjustable (LPA/Bomar style, shown above) rear sight
Hunter with adjustable (LPA/Bomar style, shown above) rear sight
Limited Custom with adjustable (LPA/Bomar style, shown above) rear sight
Limited Custom Xtreme with adjustable (LPA/Bomar style, shown above) rear sight
Match Elite with adjustable (LPA/Bomar style, shown above) rear sight
Match Xtreme with adjustable (LPA/Bomar style, shown above) rear sight
P Match with adjustable (LPA/Bomar style, shown above) rear sight
P Match Pro with adjustable (LPA/Bomar style, shown above) rear sight
Stock II Xtreme with adjustable (LPA/Bomar style, shown above) rear sight
Stock III Xtreme with adjustable (LPA/Bomar style, shown above) rear sight
Tanfoglio | Defiant Force 22
This mount does not fit:
EAA / Tanfoglio Witness with fixed rear sight
EAA / Tanfoglio Witness with Novak style adjustable rear sight, shown above
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.780"Overall Width: 1.1"Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set ScrewRed Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, HS407A3 X2, Swampfox Kingslayer / Liberty / Justice
Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Flat Head Cap Screws - Provided for Trijicon RMRThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH.
Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
