This Mount Fits:
H&K VP9 H&K VP9SK H&K VP40 H&K P30 H&K P30L H&K P30SK H&K 45 H&K 45C
This mount is not intended for use with the optics ready version of these pistols. The optics ready version can be found here.This mount does not fit:
HK USP Any Optics Ready H&K Pistol
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.604"Overall Width: .99"Mounting Hardware: (2) 6-32 Button Head Screws, (1) 6-32 X 3/16 Set ScrewRed Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. HK VP9 Red Dot Mount Installation Instructions
Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Flat Head Cap Screws - Provided for Trijicon RMRThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide. WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Alt Description:
H&K VP9 RMR Mount H&K VP9SK RMR Mount H&K VP40 RMR Mount H&K P30 RMR Mount H&K P30L RMR Mount H&K P30SK RMR Mount H&K 45 RMR Mount H&K 45C RMR Mount H&K VP9 Holosun 507c Mount H&K VP9SK Holosun 507c Mount H&K VP40 Holosun 507c Mount H&K P30 Holosun 507c Mount H&K P30L Holosun 507c Mount H&K P30SK Holosun 507c Mount H&K 45 Holosun 507c Mount H&K 45C Holosun 507c Mount H&K VP9 Holosun 407c Mount H&K VP9SK Holosun 407c Mount H&K VP40 Holosun 407c Mount H&K P30 Holosun 407c Mount H&K P30L Holosun 407c Mount H&K P30SK Holosun 407c Mount H&K 45 Holosun 407c Mount H&K 45C Holosun 407c Mount
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
