Login
Start Free Trial Are you a business? Click Here

Trijicon RMR / SRO, Holosun 407c / 507c Mount for Kimber 1911 Fixed Reviews

4.7 Rating 34 Reviews
Read EGW Guns Reviews

Mounting Hardware is Included This mount fits:
Kimber 1911's with Fixed Rear Sights Desert Eagle 1911G* Desert Eagle 1911C*
This mount does not fit:
Kimber Micro Kimber Micro 9
*This mount will require a decent amount of fitting to work with the Desert Eagles and is NOT a drop in part on that application.* Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.780"Overall Width: 1.1"Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set ScrewRed Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Flat Head Cap Screws - Provided for Trijicon RMRThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide.
WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Alt Description:
Kimber 1911 RMR Mount Desert Eagle 1911 RMR Mount Kimber 1911 Holosun 507C Mount Desert Eagle 1911 Holosun 507C Mount Kimber 1911 Red Dot Mount Desert Eagle 1911 Red Dot Mount

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

This optic mounting plate worked as advertised. It had fitment issues which required minor filing of the plate in two spots, lubrication, a vise, blocks of wood and a hammer. A gun smith could have done the job a little easier but I enjoy tinkering. The finished product is beautiful, works perfectly and is my new/old favorite gun again. There is no movement and the lower profile of thie Kimber's sight system made this gun a perfect candidate for this type of plate with out a height over bore issue and without looking like a small boat with a big sail.
Helpful Report
Posted 3 weeks ago
Quick shipping and perfect fit. Couldn’t ask for better
Helpful Report
Posted 1 month ago
You charge too much for shipping is way to expensive just for a small piece of engineered aluminum plate...
Helpful Report
Posted 1 month ago
Great and quick service!
Helpful Report
Posted 3 months ago
Decided it was time to walk from the stock iron sights on my Ultra Carry 2. The EGW plate fit the Holosun 407C optic perfectly. A little hard going on the slide, but the stock sight was a bear to get off. I'm confident it wont be moving. Glad it all worked out.
Helpful Report
Posted 4 months ago
Fits good, looks good, it was the perfect mount for my Kimber Custom LW.
Helpful Report
Posted 5 months ago
Fits perfectly on the Kimber Pro Carry II with Holosun 507C.
Helpful Report
Posted 6 months ago
Worked out perfectly, professional setup!!! Very impressed
Helpful Report
Posted 11 months ago