Login
Start Free Trial Are you a business? Click Here

Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ P10C / P10F / P10S Reviews

4.9 Rating 8 Reviews
Read EGW Guns Reviews

Mounting Hardware is Included This Mount Fits:
CZ P10C CZ P10F
This Mount Does Not Fit:
CZ P10C Optics Ready CZ P10F Optics Ready
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.780"Overall Width: 1.1"Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set ScrewRed Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Flat Head Cap Screws - Provided for Trijicon RMRThe screws that are included with this mount require a 5/64'' allen wrench for installation. WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.  
Alt Descripion:
CZ P10C dovetail mount CZ P10F dovetail mount CZ P10c Red Dot Mount CZ P10f Red Dot Mount CZ P10c Accessories CZ P10f Accessories CZ P10C trijicon rmr mount Holosun 507c CZ P10C mount

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Manufacturing is highest quality, tip my hat to your support team professionals!
Helpful Report
Posted 5 months ago
Super tight fit, easy purchase, definitely recommend to a friend. Use a site tool during installation.
Helpful Report
Posted 6 months ago
Fast delivery, easy install and works as advertised.
Helpful Report
Posted 2 years ago
Worked perfectly! Thank you EGW!
Helpful Report
Posted 2 years ago
Shipped fast and arrived as described! Was a really tight fit sliding into dovetail on slide but with some elbow grease and rubber mallet got it mounted up right! Range day the following day went off without any issues!
Helpful Report
Posted 3 years ago
Awesome product and arived a few days after ordering. Would highly suggest a gunsmith to install or the vise clamp made to remove rear sights.
Helpful Report
Posted 3 years ago
The mount worked terrific! And I might add, EGW was the only business that I found that actually had them in stock! Very satisfied!
Helpful Report
Posted 3 years ago
Fit was excellent and solid. Used on a P10s. Only gave it 4 stars because it is slightly higher than it seems it needs to be
Helpful Report
Posted 4 years ago