Login
Start Free Trial Are you a business? Click Here

Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 Reviews

4.7 Rating 18 Reviews
Read EGW Guns Reviews

Mounting Hardware is Included This Mount Fits:
CZ 75 Shadow CZ 75 SP01 Shadow CZ Shadow 2
This mount does not fit:
Shadow 2 Optics Ready Shadow 2 Kadet DWX DWX Compact
  Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.780"Overall Width: 1.1"Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 Set ScrewRed Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included.Installation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbs2 Flat Head Cap Screws - Provided for Trijicon RMRThe screws that are included with this mount require a 5/64'' allen wrench for installation. WE RECOMMEND THIS PLATE BE INSTALLED BY A QUALIFIED AND COMPETENT GUNSMITH. Modification of your firearm may nullify the manufacturer's warranty.This product should be installed and checked by a qualified gunsmith.No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.  
Alt Description:
CZ Shadow 2 Red Dot Mount CZ shadow 2 optic mount CZ shadow 2 holosun CZ shadow 2 sro CZ shadow 2 rmr plate CZ shadow 2 rmr CZ shadow 2 optic mount CZ shadow 2 dovetail optic mount shadow 2 sro CZ shadow 2 holosun plate CZ shadow 2 trijicon sro CZ 75 rmr mount Shadow 2 optic mount CZ 75 dovetail mount CZ shadow 2 dovetail mount

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

The plate is rugged and the reddot mounted on it perfectly however the dovetail design is not good ( there should be 2 holes for screws to secure it to the slide of the shadow 2 which has 2 screw grooves to prevent the plate from moving ) . After 50 rounds the plate moved .
Helpful Report
Posted 6 months ago
Fit perfectly, easy to install.
Helpful Report
Posted 1 year ago
Pins do not fit the Holoson 507 comp Not happy paid to havee put on and it does not fit
Helpful Report
Posted 1 year ago
Great product
Helpful Report
Posted 1 year ago
Worked perfect for my Shadow 2. Well worth the update of my Shadow 2 versus trading up for optics ready Shadow and buying a special CZ plate. EGW mount, 407c green dot, and $30 gun smith fee totaled $315.
Helpful Report
Posted 1 year ago
Tight!!! One word, meaning so much. Got this plate for my CZ Shadow 2. The SRO I mounted had to be pushed into the boss' of the plate. I shook the plate and the red dot didn't budge. Had to pry it off to mount the plate to the weapon. My sight pusher wasn't made for 1" wide plates. It did most of the work and I had to coax it over the last few millimeters with a small hammer. So tight to the frame, you can't see daylight between them. Absolutely love it. The gun looks tight. Thank
Helpful Report
Posted 1 year ago
fit perfectly. the dove tail was tight. works great
Helpful Report
Posted 1 year ago
sits pretty flush on the shadow 2 slide.. great way to test out the optics you’d want to have milled in. zeroed and works as advertised
Helpful Report
Posted 2 years ago