This mount fits:
Savage 301 (Factory Drilled and Tapped .410 only)
Stevens 301 (Factory Drilled and Tapped .410 only)
Please note: Trijicon recommends the use of a sealing plate to prevent water from entering their red dots.
This mount does not fit:
Stevens 301 12 Ga & 20 Ga models
Specifications
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.811"Overall Width: .99"Thickness Above Receiver: .350"Torque Specs: 15 in/lbs
Mounting Hardware:(2) 6-32 Flat Head Screws - T10(2) 8-40 Torx Screws - Requires T10 Wrench or Driver
Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice
Simply remove the factory mount and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your original mount at any time. Mounting hardware included.Installation Instructions- Remove the factory mount- Install the EGW Sight Mount on the raised interface- Secure the plate to the barrel of the gun with the provided screws and torque to 20 in/lbs- Place the red dot sight on the EGW Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided red dot mounting screws- Torque red dot mounting screws to 15in/lbsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
