Trijicon RMR / SRO, Holosun 407c / 507c Sight Mount for Taurus PT1911 Reviews

4 Rating 7 Reviews

This mount fits:
Taurus PT1911
*Red dot not included* Specifications
Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.78"Overall Width: 1.1"Mounting Hardware:(2) 6-32 Flat Head Screws Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red-dot sight. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Red Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / JusticeInstallation Instructions- Remove the rear sight*- Install the EGW Sight Mount in the dovetail- Tighten set screw (if applicable)- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque mounting screws to 15in/lbsThe screws that are included with this mount require a 5/64'' allen wrench for installation.Click here to see a video from Vortex on how to install our red dot base on a slide.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“The fault initially was mine, as I initially ordered the wrong amount. The above mentioned was out of stock so I ordered another mount from a different company. The fit was terrible. Sat way too high above the bore axis making it impossible to zero. the above mentioned came back in stock so i ordered it. the fit is much better but it still sits too high. i have it close enough to zero but cannot adjust it anymore.....”

Helpful Report

Posted 10 months ago

Occasionally the gun, mount, and dot do not want to play nicely with each other and you will run out of elevation in one direction or the other. If that is the case, you can get a 1 degree shim and place it between the dot and mount to get you back on target. If you need the point of impact to go up, you will need the thick part of the shim at the rear. If you need to move the point of impact down, the thick part of the shim will go at the front.

Posted 10 months ago

“Sight works very well. Easy to use. Installation was somewhat difficult due to the sight being a little too wide to fit into the dovetail. Some vigorous filing got it done. Maybe the dovetail was cut too small. Anyway, installed and works well. Good buy for the money.”

Helpful Report

Posted 2 years ago

“AWESOME QUALTIY AND FIT”

Helpful Report

Posted 2 years ago

“Mount didn’t fit and I’m not happy with the gun smith that installed it”

Helpful Report

Posted 2 years ago

“The sight mount fit the cut on the Taurus PT1911 but the bottom of the mount just ahead of the Novak cut hit the top of the slide. I had to remove about 0.012" to clear the slide. Also had to remove a small amount from the dovetail to get the mount in the dovetail. Work very well after these small modifications. Very solid mount.”

Helpful Report

Posted 3 years ago

“Worked , but had to file to seat properly”

Helpful Report

Posted 3 years ago

“Good fit”

Helpful Report

Posted 3 years ago