This Mount fits:
Vortex Spitfire HD Gen II 5x
Does NOT work with RMRcc Specifications Material: 7075 AluminumCoating: Matte Black HardcoatOverall Length: 1.95"Overall Width: .99"Mounting Hardware: (2) 6-32 Flat Head Screws to mount the red dot to the plateRed Dot Fitment: Trijicon RMR / SRO, Holosun HE407C / HE507C / HS407C / HS507C, Swampfox Kingslayer / Liberty / Justice Simply remove the plate on your HD Spitfire Gen II 5x and replace it with our mount in order to mount your Trijicon RMR or Holosun red-dot sight. You can take our mount off and replace the cover plate at any time. Red dot mounting hardware included.Installation Instructions- Remove the cover plate- Install the EGW sight mount and torque the mounting plate screws- Place the red dot sight on the EGW Sight Mount(placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.)- Apply blue Loctite to the provided mounting screws- Torque red dot mounting screws to 15in/lbs *When re-using the factory cover plate screws, some customers have run into issues with them bottoming out. We have found that the bottom finger of the helicoil inside the theads on the spitfire may be contacting the screw, preventing it from threading in all the way. If you carefully push the finger down and to the side, that should allow the screw to thread all the way in. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
