Login
Start Free Trial Are you a business? Click Here

EGW Keystone 1" High-Profile Scope Rings (1.275") Reviews

4.9 Rating 12 Reviews
Read EGW Guns Reviews


Flagship Keystone Series | SKU 62002
EGW Keystone 1-Inch High Scope Rings
EGW Keystone 1.275-inch high-profile scope rings position a 1-inch optic higher above the mounting rail when additional clearance or a higher sight line is required. These rings are precision CNC-machined from 6061 aluminum at our Quakertown, Pennsylvania facility and designed for Picatinny and Weaver-style cross-slot rails.
Keystone is the flagship of the EGW scope ring lineup, combining a streamlined horizontal-split design, Chromoly crossbolts, secure cap hardware, and 100% American manufacturing.
This Configuration
Scope tube: 1 inch
Centerline height: 1.275 inches
Profile: High
Rail type: Picatinny or Weaver-style
Quantity: One pair of rings
Designed for Additional Height
The 1.275-inch measurement is taken from the top of the mounting rail to the centerline of the scope tube. This height is commonly considered for flat-top platforms, chassis rifles, large objective bells, tall handguards, adjustable combs, and other setups requiring additional clearance or a higher optic position.
Why Choose Keystone 1-Inch Scope Rings?
Precision CNC-Machined
Machined from 6061 aluminum to maintain consistent dimensions and mating surfaces while keeping unnecessary weight out of the mounting system.
Horizontal-Split Design
The horizontal split provides straightforward scope positioning and allows the ring-cap screws to be tightened evenly during installation.
Chromoly Crossbolts
Chromoly crossbolts provide a strong mechanical connection between the rings and a compatible cross-slot mounting rail.
Cross-Slot Compatibility
Keystone rings are designed to mount to Picatinny and Weaver-style cross-slot rails, giving shooters flexibility across a wide range of rifle setups.
50;"> High 1.275-Inch Centerline
The high centerline provides additional room for large objective bells, tall handguards, scope caps, heavy barrel contours, and rifle configurations that need a higher optic position.
Made in Pennsylvania
Keystone rings are 100% American-made and manufactured by EGW at our facility in Quakertown, Pennsylvania.
Product Specifications
Series
Keystone
SKU
62002
Scope Tube Diameter
1 inch
Ring Height
1.275 inches, measured from the top of the rail to the scope centerline
Profile
High
Material
6061 aluminum
Finish
Matte black anodized
Rail Compatibility
Picatinny and Weaver-style cross-slot rails
Construction
Horizontal split with Chromoly crossbolts
Crossbolt Torque
65 inch-pounds
Ring-Cap Torque
15 inch-pounds maximum, subject to the scope manufacturer's limit
Quantity
Sold as one pair
Manufactured In
Quakertown, Pennsylvania, USA
GTIN
841370117895
When Should You Choose 1.275-Inch High Rings?
Choose the 1.275-inch high configuration when the low or medium Keystone rings do not provide enough clearance, or when the rifle requires a higher optic centerline for a comfortable and repeatable shooting position.
Common reasons to select high rings include:
A flat-top rifle or chassis configuration
A tall or adjustable stock comb
A large objective bell or thick lens covers
A heavy barrel or tall handguard
Additional bolt-handle or action clearance
A piggyback optic or accessory configuration
A preference for a more upright head position
Minor fitment may be required. High rings do not automatically guarantee proper eye alignment or clearance on every rifle. Measure the complete setup and verify that the optic can be positioned for proper eye relief and a consistent cheek weld.
Use the EGW Ring Height Calculator
Compare 1-Inch Keystone Ring Heights
.850-Inch Low
For low-profile rifle and optic setups
View Low Rings ›
.990-Inch Medium
A versatile balance of mounting height and clearance
View Medium Rings ›
Current Selection
1.275-Inch High
For additional clearance and higher optic positions
Installation and Torque
Confirm the firearm is unloaded before beginning installation. Inspect and clean the rail, rings, and hardware, then follow the instructions supplied with the rings and scope.
Tighten the Keystone crossbolts to 65 inch-pounds.
Tighten the ring-cap screws evenly to a maximum of 15 inch-pounds.
If the scope manufacturer specifies a lower maximum torque, follow the lower specification.
Verify proper eye relief, scope position, clearance, and operation of all firearm controls.

Visit Product Page

Location:

1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951

“HAVE INSTALLED A LOT OF DIFFERENT BRANDS OF SCOPE RINGS OVER THE PAST 40+ YRS. & MUST CONFESS "THESE ARE THE MOST BAD-ASS RINGS I HAVE EVER INSTALLED !!! ABSOLUTE BRUTES THAT ARE UGLY AS ALL GET-OUT BUT ARE HELL FOR STOUT. THEY ARE MADE FROM AN ALUM-ALLOY BUT ARE STILL QUITE HEAVY. SO DO NOT PURCHASE THESE IF WEIGHT IS A PROBLEM !!! HOWEVER, THEY WERE SUPER EASY TO LOOSELY INSTALL ON THE PIC-RAIL & THEN USED A 1" SOLID STEEL LAPPING BAR TO ALIGN THEM BEFORE USING A .500" SOCKET WRENCH TO GENTLY SNUGGED TO CORRECT TORQUE. WHEN IT COMES TO LAPPING RINGS, I USE A HOME-BREW RECIPE OF 1000 GRIT ABRASIVE & BLENDED SMOOTHLY INTO SYN. BEARING GREASE. WHEN LAPPING I USE THE OLD-SCHOOL "BACK & FORTH WHILE ROTATING THE BAR FROM SIDE TO SIDE" WHICH CREATES A REALLY NICE CROSS-HATCH AFFECT. I MUST SAY, THESE WERE THE EASIEST RINGS TO LAP, NOT BECAUSE THE ALLOY WAS TOO SOFT, BUT BECAUSE THE LOWER & UPPER RING HALVES WERE SO DAMN PRECISELY REAMED BY THE FOLKS @ "EGW".....BRAVO !!!!! FINISHED WITH AN "OIL-LAP" TO REMOVE ANY MICROSCOPIC PIECES OF GRIT, CLEANED OFF WITH PAPER TOWELS, & DID A FINAL POLISH WITH A DAB OF FLITZ METAL POLISH. BTW: I ONLY LAP THE BOTTOM HALF OF THE RINGS !!!!!! WHEN INSTALLING THE TOP HALF, PLACE A COUPLE OF DROPS OF OIL ON THE RING SCREWS, AS THIS HELPS THEM TO REACH THEIR RECCOMMENDED TORQUE SETTINGS MUCH EASIER. CONCLUSION: ABSOLUTELY THE MOST ROBUST SCOPE RINGS I HAVE EVER INSTALLED !!!!!!!!!”
Helpful Report
Posted 4 years ago
“ARE YOU LOOKING FOR SCOPE RINGS THAT ARE (#1) LIGHT-WEIGHT (#2) PLEASING TO THE EYE (#3) WOULD REALLY COMPLIMENT YOUR .416 RIGBY BOLT-ACTION (#4) READILY AVAILABLE @ YOUR LOCAL MART-MART STORE ??? THEN FOR SURE DO NOT BUY THESE !!!!!! HOWEVER, IF YOU ARE REQUIRING RINGS THAT ARE TOTALLY INFALLIBLE & RECOIL PROOF ENOUGH TO PUT ON YOUR .50 BMG RIFLE, & SINCERELY BELIEVE THAT "STRONG & UGLY GOES PLUMB TO THE BONE", THEN YOU HAVE DISCOVERED "SCOPE RING NIRVANA" @ ITS VERY BEST !!!! PRAISE THE LORD, THEY ARE NOT MADE FROM SOLID STEEL BUT WILL STILL MAKE A FANTASTIC PAPER-WEIGHT FOR YOUR DESKTOP & DON'T DROP ONE ON YOUR BIG-TOE....OUCH !!!!! THE LARGE FRONT & REAR FLATS + EDGES HAVE PLENTY OF ROOM FOR CUSTOM ENGRAVING IF ONE SO DESIRES. TRULY THE "BEAST OF RINGS" AS I HAVE NEVER SEEN IN THE PAST 50 YRS. OF MY SHOOTING, HUNTING, & GUNSMITHING HOBBY. THESE SHOULD BE PICTURED IN A DICTIONARY NEXT TO THE WORD "OVER-KILL"-----OORAH, SEMPER-FI, & KEEP EVERY SHOT INSIDE THE 10 RING !!!!!”
Helpful Report
Posted 4 years ago
“Great rings, this is the third pair I have purchased.”
Helpful Report
Posted 4 years ago
“We love EGW.. always quality, always performs”
Helpful Report
Posted 5 years ago