Flagship Keystone Series | SKU 62100
EGW Keystone 30mm Low Scope Rings
Mount a 30mm scope close to the rifle with EGW Keystone .850-inch low-profile scope rings. These rings are precision CNC-machined from 6061 aluminum at our Quakertown, Pennsylvania facility and designed for Picatinny and Weaver-style cross-slot rails.
Keystone is the flagship of the EGW scope ring lineup, combining a streamlined horizontal-split design, Chromoly crossbolts, secure cap hardware, and 100% American manufacturing.
This Configuration
Scope tube: 30mm
Centerline height: .850 inch
Profile: Low
Rail type: Picatinny or Weaver-style
Quantity: One pair of rings
Check Clearance Before Ordering
The .850-inch measurement is taken from the top of the mounting rail to the centerline of the scope tube. These low rings are commonly suited to 44mm objectives and may accommodate some 50mm objectives, but objective size alone cannot guarantee fitment.
Why Choose Keystone 30mm Scope Rings?
Precision CNC-Machined
Machined from 6061 aluminum to maintain consistent dimensions and mating surfaces while keeping unnecessary weight out of the mounting system.
Horizontal-Split Design
The horizontal split provides straightforward scope positioning and allows the ring-cap screws to be tightened evenly during installation.
Chromoly Crossbolts
Chromoly crossbolts provide a strong mechanical connection between the rings and a compatible cross-slot mounting rail.
Cross-Slot Compatibility
Keystone rings are designed to mount to Picatinny and Weaver-style cross-slot rails, giving shooters flexibility across a wide range of rifle setups.
Low .850-Inch Height
The low centerline height helps position the optic close to the rifle when the objective bell, barrel, rail, and action provide sufficient clearance.
Made in Pennsylvania
Keystone rings are 100% American-made and manufactured by EGW at our facility in Quakertown, Pennsylvania.
Product Specifications
Series
Keystone
SKU
62100
Scope Tube Diameter
30mm
Ring Height
.850 inch, measured from the top of the rail to the scope centerline
Profile
Low
Material
6061 aluminum
Finish
Matte black anodized
Rail Compatibility
Picatinny and Weaver-style cross-slot rails
Construction
Horizontal split with Chromoly crossbolts
Crossbolt Torque
65 inch-pounds
Ring-Cap Torque
15 inch-pounds maximum, subject to the scope manufacturer's limit
Quantity
Sold as one pair
Manufactured In
Quakertown, Pennsylvania, USA
GTIN
841370117901
Will .850-Inch Low Rings Fit Your Scope?
These rings are a strong starting point for many 30mm hunting, sporting, and precision scopes with 44mm objectives. Some 50mm objective scopes may also fit, but clearance depends on the objective bell's actual outside diameter and the complete rifle setup.
Measure and account for:
The objective bell's outside diameter
Rail height above the receiver
Barrel diameter and contour
Scope-cap or lens-cover thickness
Bolt-handle and action clearance
Power-selector and magnification-ring clearance
Stock or chassis comb height
Minor fitment may be required. Always verify that the scope, objective bell, caps, controls, and bolt handle move freely without contacting the rifle.
Use the EGW Ring Height Calculator
Compare 30mm Keystone Ring Heights
Current Selection
.850-Inch Low
For low-profile rifle and optic setups
.990-Inch Medium
Provides additional objective and barrel clearance
View Medium Rings ›
1.275-Inch High
For tall setups, large clearances, and flat-top platforms
View High Rings ›
Installation and Torque
Confirm the firearm is unloaded before beginning installation. Inspect and clean the rail, rings, and hardware, then follow the instructions supplied with the rings and scope.
Tighten the Keystone crossbolts to 65 inch-pounds.
Tighten the ring-cap screws evenly to a maximum of 15 inch-pounds.
If the scope manufacturer specifies a lower maximum torque, follow the lower specification.
Verify that the scope remains properly positioned and that all firearm controls operate freely.
Important: Do not exceed the scope manufacturer's published torque specification. Excessive ring-cap torque can damage the scope tube or internal components.
Frequently Asked Questions
What scopes fit these rings?
These rings fit scopes with a 30mm main tube. They will not fit a 1-inch or 34mm scope tube.
Will .850-inch rings clear a 50mm objective?
They may clear some 50mm objective scopes, but fitment cannot be guaranteed from the listed objective size alone. Measure the objective bell's outside diameter and account for the rail, receiver, barrel, lens caps, bolt handle, and scope controls.
How is the .850-inch height measured?
EGW measures ring height from the top mounting surface of the rail to the centerline of the scope tube.
Do Keystone rings fit Weaver rails?
Keystone rings are designed for Picatinny and Weaver-style cross-slot rails. Verify the dimensions and condition of the specific rail before installation.
Are the rings sold individually?
No. This product includes one pair of Keystone scope rings.
Can I add an EGW Piggyback System?
Yes. Select the appropriate 30mm piggyback ring cap and the separate adapter plate for the intended optic or accessory. Both components are required for a complete piggyback setup.
Keystone Scope Ring Resources
Shop and Compare All Keystone Scope Rings
EGW Scope Ring Height Chart and Calculator
Scope Ring Selection Guide
View All EGW Precision Scope Rings
California Proposition 65 Warning: This product may be alloyed with trace amounts of lead and other elements known to the State of California to cause cancer and reproductive harm. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
Location:
1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951
