Flagship Keystone Series | SKU 62200
EGW Keystone 34mm Low Scope Rings
EGW Keystone .990-inch low-profile scope rings were specifically designed to work with 34mm scopes featuring 56mm objectives while keeping the optic as low as possible. These rings are precision CNC-machined from 6061 aluminum at our Quakertown, Pennsylvania facility and designed for Picatinny and Weaver-style cross-slot rails.
Keystone is the flagship of the EGW scope ring lineup, combining a streamlined horizontal-split design, Chromoly crossbolts, secure cap hardware, and 100% American manufacturing.
This Configuration
Scope tube: 34mm
Centerline height: .990 inch
Profile: Low
Designed for: 56mm objectives
Rail type: Picatinny or Weaver-style
Quantity: One pair of rings
Designed for 56mm Objectives
The .990-inch low Keystone rings were designed to work with 34mm scopes featuring 56mm objectives. Ring height is measured from the top of the mounting rail to the centerline of the scope tube. Because objective-bell outside dimensions and rifle geometry vary, always verify clearance on your specific rifle, rail, and optic.
Why Choose Keystone 34mm Scope Rings?
Precision CNC-Machined
Machined from 6061 aluminum to maintain consistent dimensions and mating surfaces while keeping unnecessary weight out of the mounting system.
Horizontal-Split Design
The horizontal split provides straightforward scope positioning and allows the ring-cap screws to be tightened evenly during installation.
Chromoly Crossbolts
Chromoly crossbolts provide a strong mechanical connection between the rings and a compatible cross-slot mounting rail.
Cross-Slot Compatibility
Keystone rings are designed to mount to Picatinny and Weaver-style cross-slot rails, providing compatibility across a wide range of rifle setups.
Low .990-Inch Height
The lowest Keystone height available for 34mm scopes was designed to accommodate 56mm objectives while keeping the optic close to the rifle.
Made in Pennsylvania
Keystone rings are 100% American-made and manufactured by EGW at our facility in Quakertown, Pennsylvania.
Product Specifications
Series
Keystone
SKU
62200
Scope Tube Diameter
34mm
Ring Height
.990 inch, measured from the top of the rail to the scope centerline
Profile
Low
Designed Objective Size
56mm, subject to rifle and optic clearance
Material
6061 aluminum
Finish
Matte black anodized
Rail Compatibility
Picatinny and Weaver-style cross-slot rails
Construction
Horizontal split with Chromoly crossbolts
Crossbolt Torque
65 inch-pounds
Ring-Cap Torque
15 inch-pounds maximum, subject to the scope manufacturer's limit
Quantity
Sold as one pair
Manufactured In
Quakertown, Pennsylvania, USA
GTIN
841370117932
Designed to Keep a 56mm Objective Low
The .990-inch low height was specifically designed to provide a low mounting solution for 34mm scopes with 56mm objectives. This allows many shooters to keep a large precision optic close to the rifle without automatically moving to medium-height rings.
Measure and account for:
The objective bell's actual outside diameter
Rail height above the receiver
Action length and available scope position
Barrel diameter and contour
Scope-cap or lens-cover thickness
Bolt-handle and action clearance
Power-selector and magnification-ring clearance
Stock or chassis comb height
Minor fitment may be required. Although these rings were designed for 56mm objectives, actual clearance depends on the outside dimensions of the scope and the complete rifle setup. Always verify that the objective bell, scope caps, controls, and bolt handle move freely without contacting the rifle.
Use the EGW Ring Height Calculator
Compare 34mm Keystone Ring Heights
Current Selection
.990-Inch Low
Designed to keep 56mm objectives low
1.275-Inch Medium
Provides additional clearance and a higher optic position
View Medium Rings ›
1.500-Inch Extra High
For maximum clearance and tall flat-top setups
View Extra-High Rings ›
Installation and Torque
Confirm the firearm is unloaded before beginning installation. Inspect and clean the rail, rings, and hardware, then follow the instructions supplied with the rings and scope.
Tighten the Keystone crossbolts to 65 inch-pounds.
Tighten the ring-cap screws evenly to a maximum of 15 inch-pounds.
If the scope manufacturer specifies a lower maximum torque, follow the lower specification.
Verify that the scope remains properly positioned and that all firearm controls operate freely.
Important: Do not exceed the scope manufacturer's published torque specification. Excessive ring-cap torque can damage the scope tube or internal components.
Frequently Asked Questions
What scopes fit these rings?
These rings fit scopes with a 34mm main tube. They will not fit a 1-inch or 30mm scope tube.
Were these rings designed for 56mm objective scopes?
Yes. EGW designed the .990-inch low 34mm Keystone rings specifically to work with scopes featuring 56mm objectives while keeping the optic as low as possible. Because the outside diameter of the objective bell, rail height, receiver, barrel contour, and lens caps vary, clearance should still be verified for the exact rifle and optic combination.
When should I choose the 1.275-inch medium rings?
Choose the medium height when the .990-inch low rings do not provide enough room for the objective bell, barrel contour, scope caps, bolt handle, action, or another part of the setup. Additional height may also help with long-action rifles, chassis systems, adjustable stock combs, and heavy barrel contours.
How is the .990-inch height measured?
EGW measures ring height from the top mounting surface of the rail to the centerline of the scope tube.
Do Keystone rings fit Weaver rails?
Keystone rings are designed for Picatinny and Weaver-style cross-slot rails. Verify the dimensions and condition of the specific rail before installation.
Are the rings sold individually?
No. This product includes one pair of Keystone scope rings.
Can I add an EGW Piggyback System?
Yes. Select the appropriate 34mm piggyback ring cap and the separate adapter plate for the intended optic or accessory. Both components are required for a complete piggyback setup.
Keystone Scope Ring Resources
Shop and Compare All Keystone Scope Rings
EGW Scope Ring Height Chart and Calculator
Scope Ring Selection Guide
View All EGW Precision Scope Rings
California Proposition 65 Warning: This product may be alloyed with trace amounts of lead and other elements known to the State of California to cause cancer and reproductive harm. To prevent exposure, do not alter the product by welding, grinding, or similar processes. For more information, visit www.P65Warnings.ca.gov.
Location:
1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951
