This mount fits (Weaver 93 Pattern):
Remington Model 4 (red bag of screws) Remington Model 6 (red bag of screws) Remington Model 7400 (red bag of screws) Remington Model 7600 (red bag of screws) Remington Model 750 (red bag of screws) Remington Model 7615 (red bag of screws) Benelli Auto (red bag of screws) Benelli Super Black Eagle (red bag of screws) Benelli Super Black Eagle II (yellow bag of screws)
Benelli SBE II (red bag of screws)
Benelli Super Black Eagle III (yellow bag of screws)
Benelli SBE III (red bag of screws)
Benelli Vinci (red bag of screws) Benelli M2 (yellow bag of screws) Franchi Affinity 3.5 (yellow bag of screws) Stoeger M3000 (after ser #1368845) (red bag of screws) Stoeger M3500 (after ser #1368845) (red bag of screws) Stoegers pre serial # 1368845 have #6-48 screws.
Rail Type: One Piece PicatinnyMachined From: Solid 7075 T6 Aircraft Grade AluminumFinish: Matte Black HardcoatCenter Spread: 2.05"Overall Length of Mount: 5.488"Height: .35" (Top of Receiver to Top of Picatinny)Weight: 2.5 ozAmbidextrous: YesCompatible with Picatinny or Weaver scope rings.Mounting Hardware: #8-40 X 1/4 Screws and T-10 Bit IncludedTorque Specs: 20 in/lbsCompatible with Picatinny Scope Rings or Weaver scope rings. We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
