This mount fits:
Savage Model 110 Long Action Round Rear Receiver Savage Model 111 Long Action Round Rear Receiver Savage Model 112 Long Action Round Rear Receiver Savage Model 114 Long Action Round Rear Receiver Savage Model 116 Long Action Round Rear Receiver Stevens Model 200 Long Action Round Rear Receiver
Rifles requiring #8 screws (please check your individual rifle to be sure):
10/110 BA Stealth 10/110 Stealth Evolution 110 Scout 110 Wolverine 10 GRS 110 Tactical 110 Tactical LH 110 Tactical Desert 110 Ultralite
This mount does not fit:
Savage Edge Savage Axis Savage Axis II Savage Model 25 Savage Long Actions with Flat Rear Receivers Savage Medium Actions with Flat Rear Receivers
80332 mounts manufactured after 12/2020 are drilled to accommodate larger diameter screws (#8-40) and now come with #6-48 and #8-40 screws. The head diameter on the #6-48 screws provided with this mount is larger than our normal #6-48 screws.If you have questions about your specific firearm, or need help regarding the specific screw size, you should contact Savage Customer Support at (413) 568-7001 or (800) 370-0708 and supply them with your serial number. The blue bag of screws provided are #6-48 screws. The red bag of screws provided are #8-40 screws. Rifles requiring #8 screws (please check your individual rifle to be sure):10/110 BA Stealth10/110 Stealth Evolution110 Scout110 Wolverine10 GRS110 Tactical110 Tactical LH110 Tactical Desert110 UltraliteChristensen Arms Ridgeline Screw Diameters#6 Screws - .13" diameter#8 Screws - .16" diameterThis mount does NOT fit the 212 The 212 mount is available Our Savage bases will work with any long action round back Savage rifle with an ejection port. It is alsocompatible with the Stevens Long actions.The round back on this mount will accommodate rounded receivers, and guns that have an accu-trigger.Savages without an accu-trigger will require our flat back mount (listed separately). This mount comes standard with a bevel on both sides making it ambidextrous. Specifications
Rail Type: One Piece Picatinny Compatible with Picatinny or Weaver scope rings.Machined from: Domestic Solid 7075 T6 Aircraft Grade AluminumFinish: Matte Black OnlyCenter Spread: 4.630"Overall Length: 7.458"Height: .4" (Top of Receiver to Top of Picatinny)Weight: 2 oz.Quick Disconnect Ring Compatible: YesAmbidextrous: YesTorque Specs: 20 in/lbsMounting Hardware: #6-48 X 1/4 Screws, #8-40 X 1/4" Screws and T-10 Bit Included
We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
