HD CZ 452, 453, 455, 511, 512 For 11mm Picatinny Rail 20 MOA Reviews

5 Rating 2 Reviews

Machined From: Solid 7075 T6 Aircraft Grade AluminumFinish: Matte Black OnlyCompatible with Picatinny or Weaver scope rings.Mounting Hardware: Socket Head Torx® Screws and Wrench ProvidedOverall Length of Mount: 5.575" This base is Right-Handed only.It is available in 3/8" and 11mm dovetails. Determine which dovetail you have by measuring across the top of the dovetail. If you measure 0.437" you have an 11mm dovetail. If you measure 0.5" you have a 3/8" dovetail.We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. We recommend:0 MOA - if shooting 0-150 yards20 MOA - if shooting 150-300 yardsInstallation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.

Visit Product Page

Location:

52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951

Visit Product Page

“I ordered the 20 MOA EGW rail for my CZ 455 to replace the 0 MOA rail that was on the rifle. Excellent quality as usual. When I got ready to put the Burris Signature Zee Rings on the rail, they wouldn't fit. Once those are torqued down, they stay in a compressed position. So what to do? I went online to EGW and ordered a set of their Heavy Duty Tactical .990 rings. In my opinion, the best rings out there. I have those on two other rifles. Getting back to the EGW 20 MOA rail for my CZ 455, I ordered another one in 20 MOA for my CZ 457. It's highly likely that I'll be ordering yet another of the aforementioned rings. It may be that I'll be replacing Burris rings on a number of other rifles with those made by EGW. Solid quality that can't be beat on any of their products.”

Helpful Report

Posted 2 years ago

“I have a Kimber Govt. M#82 22LR target rifle that I shoot at 100 yards. I recently mounted a newly purchased Night Force 12X42X56 target scope. When zeroed, I was at the extreme top of the scope's elevation. The rifle has an 11mm dovetail cut into the receiver. EGW was the only company I could find that made a 20MOA rail that would work on this rifle. I spoke with a representative of the company to verify the rail would work...ordered the rail...installed the rail and re-zeroed the rifle. The elevation scope adjustment dropped almost exactly 20 MOA. Thanks, EGW”

Helpful Report

Posted 3 years ago