HD Picatinny Rail for Browning X-Bolt Super Short Action (SSA) - 0 MOA - Bronze
The ultimate accuracy upgrade for your Browning X-Bolt Super Short Action (SSA). Precision-machined from solid 7075 T6 aircraft-grade aluminum and finished in a durable Bronze Cerakote, this one-piece Picatinny rail provides a rock-solid, continuous mounting platform for your optic. Whether you are hunting varmints or punching paper, this mount eliminates the alignment issues of two-piece bases and ensures your scope holds zero under any conditions.
CRITICAL FITMENT: MEASURE BEFORE BUYING
Confused? Read our Guide: X-Bolt I vs. X-Bolt II Identification
1. DOES NOT FIT X-BOLT II (Gen 2): Browning does not produce the new X-Bolt II in a Super Short Action. If you have an X-Bolt II (logo on receiver), you likely need the standard Short Action rail.
2. Do not assume action size by caliber: To our knowledge, Browning has started producing some .22-250 and .204 Ruger receivers with this Super Short Action spacing, while others use standard Short Action spacing.
YOU MUST MEASURE: The center-to-center spacing of the two inner holes on this rail is 2.825". Please measure your inside hole spacing to confirm fitment before ordering.
Compatibility Guide
Fits: Browning X-Bolt Super Short Action (SSA) - Gen 1 Only
Hole Spacing: 2.825" (Center Spread)
Common Calibers: .223 WSSM, .243 WSSM, .25 WSSM
Variable Calibers (MEASURE FIRST): .223 Rem, .204 Ruger, .22-250
Does NOT Fit: Browning X-Bolt II (Gen 2)
The EGW Solution for Your X-Bolt
The secret to repeatable accuracy is a mounting platform that will not shift or fail. Here’s why our HD rail is the superior choice:
Durable Bronze Cerakote Finish: This rail is finished with a premium Bronze Cerakote, offering exceptional corrosion resistance and a custom aesthetic that matches many factory Browning finishes.
Machined from 7075 T6 Billet: Our HD rail is machined from solid, American-sourced 7075 T6 aluminum, providing the strength of steel at a fraction of the weight for maximum rigidity.
Superior One-Piece Design: Our one-piece Picatinny rail eliminates the alignment issues common with two-piece bases, ensuring your scope rings are perfectly concentric.
Full-Length Picatinny Slots: Full-length cross-slots give you maximum flexibility for scope ring placement and proper eye relief, and are compatible with both Picatinny and Weaver rings.
Gunsmith & Installation Warning: Check Your Countersink
We STRONGLY suggest taking your gun to a qualified and competent gunsmith to have this mount installed.
Older X-Bolts had front screw holes threaded to the top of the receiver. Newer models have a deeper countersink. Our mounts made after January 2021 (date code '21' or higher on the bottom) have a deeper countersink to match newer rifles.
We recommend test fitting the screws before Loctiting. If the screws only engage with one thread (on an older mount), please contact us for longer screws (.335" OAL). If the screws bottom out (on a newer mount with an older rail), we recommend removing a small amount of material from the screw. The front screws can be torqued to 10 in/lbs.
Specifications
Rail Type: One Piece PicatinnyMachined from: Solid 7075 T6 Aircraft Grade AluminumFinish: Bronze CerakoteMOA: 0 (Parallel)Center Spread: 2.825"Overall Length: 5.790"Height: .540" (Top of Receiver to Top of Picatinny)Weight: 2.5 oz.Quick Disconnect Ring Compatible: YesAmbidextrous: NoMounting Hardware: #6-48 X 1/4 Screws and T-10 Bit IncludedTorque Specs: 20 in/lbs (Rail to Receiver), 10 in/lbs (Front screws if modified)
X-Bolt SSA Scope Mount FAQ
What is a 0 MOA scope mount for?
A 0 MOA mount is a parallel mount that has no built-in angle. It is the perfect choice for hunters and shooters operating within the standard effective range of their cartridge (0-500 yards). It ensures you have the full range of your scope's internal adjustment for easy zeroing.
Installation Recommendations?
We recommend 20 inch-lbs of torque for the mounting screws and a drip of blue Loctite (sold separately). Always test fit screws first to ensure they do not bottom out or have insufficient engagement due to the countersink variations mentioned above.
Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
52 BELMONT AVE,
QUAKERTOWN
Pennsylvania
18951
