Picatinny Rail Scope Mount for Beretta 1301 Competition, TX4, A400 Xtreme Plus. Do you need a picatinny scope rail for your Beretta 1301 Competition, Beretta TX4 or Beretta A400 Xtreme Plus? Our one piece Beretta picatinny scope mount is the best option because it provides a solid and dependable platform for your shotgun. This scope mount is proudly made in the USA and comes with all of the necessary mounting hardware. This picatinny mount fits:
Beretta 1301 Competition Beretta TX4 Beretta A400 Xtreme Plus
Specifications
Rail Type: One Piece PicatinnyMachined From: Solid 7075 T6 Aircraft Grade AluminumFinish: Matte Black HardcoatCenter Spread: 1.85"Overall Length of Mount: 6.276"Height: .35" (Top of Receiver to Top of Picatinny)Weight: 2.5 ozQuick Disconnect Ring Compatible: YesAmbidextrous: YesCompatible with Picatinny or Weaver scope rings.Mounting Hardware: M4 x .7mm X 8mm ScrewsTorque Specs: 20 in/lbs
You will need to remove the plastic plugs on your receiver before installing this picatinny rail. We always recommend making sure the threaded holes are completely clear of any debris before installing the rail. Place the rail on the receiver with the overhang facing forward, place a small dab of blue thread locker on the provided mounting screws and torque them to 20 in/lbs. We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published. Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike. This mount is a Picatinny-style base and compatible with Picatinny or Weaver scope rings. We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type III anodized for long lasting durability. We recommend:0 MOA - if shooting 0-500 yards20 MOA - if shooting 500-1000 yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards. Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately). The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA. Warning: This product may be alloyed with trace amounts of lead and other elements which are known to the State of California to cause reproductive harm and cancer. To prevent exposure, do not alter the product by welding, grinding, etc. For more information, go to www.P65Warnings.ca.gov.
Location:
1121A Richland Commerce Dr,
QUAKERTOWN
Pennsylvania
18951
