PD80 Post Driver, Tractor-Mounted Reviews

4.1 Rating 10 Reviews

Company Reviews

Product Reviews

6,291

The Kencove PD80 Post Driver is durable and reliable.
- Drives steel posts, wood posts, and railroad ties up to 7⅛" diameter X 10' tall
- 30,000 pounds of impact at full stroke
- Manual tilt features: 15-degree front-back and 15-degree side-side
- Comes complete with 3-point hitch Category I & II and secure-stand base
- Maximum hydraulic limit: 2,500 PSI

The return line (dump line) must return to your hydraulic fill reservoir. This line cannot be quick coupled back into your machine.

When driving 4x4 or 6x6 square posts, we recommend drilling a pilot hole to help keep the post straight. You can also use the back corner of the beam as a guide for the post to help keep it straight.

NOTE: Some assembly is required.

To see if your tractor is compatible with this post driver, use tractordata.com as a general reference.

Visit Product Page

“Awesome tool! I had a couple of questions during assembly, called KENCOVE and Digger promptly helped me out. Looking forward to my next fencing job!”

Helpful Report

Posted 6 years ago

Verified Buyer

Unverified Reviewer

“Everything was perfect. Thank you!”

Helpful Report

Posted 7 years ago

Verified Buyer

Unverified Reviewer

“The PD80 worked just as described and shown on the videos. It will drive a 3-4" 10' post in 8-10 blows. Best thing too is its made in the good ole USA. UPS lost one of the boxes which had some of the bolts in it but I was able to get them at the hardware store so no beg loss there. Very simple to put together and use.”

Helpful Report

Posted 7 years ago

Verified Buyer

Unverified Reviewer

“Definitely easier than using an auger. Drives 4x4 posts, have not yet tried our round posts, will use it for that project next. Gave it 4 stars because the post holder does not work well for the 4x4s. Can tell it is designed for round posts. Would recommend as a time and money saver if you plan to drive a lot of posts.”

Helpful Report

Posted 7 years ago

Verified Buyer

Unverified Reviewer

“Product works well. Some assembly instructions were vague . Could have gone a little better if customer service would answer a phone call or email.”

Helpful Report

Posted 8 years ago

“Once you get the assembly completed it worked very well. Had a few issue with assembly like missing hardware, and some of the directions in the manual were vague. Could not get anyoneâ€‹ by phone or email to clear these issue up.”

Helpful Report

Posted 8 years ago

Verified Buyer

Unverified Reviewer

“if I was going to do a lot of fence I would spend the extra for hydraulic tilt.”

Helpful Report

Posted 8 years ago

“I purchased this post driver in March 2015 and have installed 500 8 foot length , 3 to 4 inch diameter wooden post and 45 8 foot length , 5 to 6 inch diameter wooden post already. All in hard rocky clay soil of central Virginia. The PD80 has performed flawlessly. Nothing but praise for the product. Highly recommend it.”

Helpful Report

Posted 10 years ago