How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“Worst experience ever building an arf, non of the parts fit, I broke a part of the engine mount trying to put it into the wing because they don't build it to fit right, the instructions don't tell you how to install the landing gears one bit they only show the gear pre installed, don't even wash your money buying retracts because those are the biggest waste of money because the ones you get don't even work with the plane”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“Just flew the maiden in very heavy 15 mph winds down the runway. Plane flew perfectly. Very stable. No trim required at all. Really amazing. Landed with full flaps.”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“1-st issue is CG. It is impossible to accomplish CG specified by Manual using the two 3 cell 5000mAh LIPOs specified by Motion-RC. You will be super nose heavy. It is possible that CG in the book is incorrect. So I ended up using one 5000 mAh LIPO instead of two in order to get book CG. When flying, the airplane behaved like super tail heavy. It will take off without applying any elevator, with all 3 wheels still on the ground. Tail will not go up when you pick up speed on the runway, like it is supposed to make the airplane straight. As a result of that it will have tendency to stall due to high angle of attack after it takes off.2-nd issue is retractable landing gear. Each gear is made of 43 pieces (not counting electronic retract), out of which there are fifteen 1.5 mm set screws. Only 2 places have flat spot. All other set screw go to round bars. There is one 1.5 mm set screw that prevents gear from folding (or collapsing) during take off, or landing, or taxing. That set screw will give up and you will end up scraping the runway. Initially the gear folded on me several times. Check my YouTube video titled "C 47 Main Gear Design Issue". Even when you resolve all that the gear issues, the gear will be getting stuck during retracting because the wooden opening has 0 tolerance, and gear will be rubbing against the wood.I flew the airplane 3 times (each time a nightmare), I crushed it after 3-rd takeoff when it went up and stalled due to lack of speed due to high angle of attack (even though I moved my battery forward compared to other flights). My advise is use two LIPOs instead of one LIPO that I used. My opinion is that this is badly engineered airplane. I will not fix it or buy it again. I am not even mentioning what you have to go through to fit ESC, and other assembly challenges.At the time of writing this review out of 4 reviews, only one person presumably flew the airplane. That person wrote it flies like a fighter airplane which tells me he did not fly it. Buy it for looks or for experimenting how to make it work.”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“there is no any information about or any pictures if you want put any kind of gas/nitro engines and there is no place to put fuel tank ether . thanks”
How would you rate the overall quality of the product?
Very Low
Okay
Very Good
How would you rate the value of the product for the money?
Very Low
Okay
Very Good
How difficult or easy is the product to assemble, use, or operate?
Very Difficult
Average
Very Easy
How well does the product perform / function?
Very Weak
Okay
Very Good
“Straight forward assembly with a few needed mods. Maiden flight took a 1/4 inch of L-aileron to fly this level. ballooned big time when going to full throttle. a high altitude stall test it tip stalled at almost half throttle and it took 3 turns to pull it out. After taking an incidence meter to the wing it had a bad warp at the root. Per the plans too much up thrust causing the ballooning. Second flight it tip stalled in a half throttle wide turn and spun in. I have been building and flying for 30 years, this arf was poorly built and heavy for its size. They do crash when they are crooked and heavy. IMO this airplane is overpriced and poorly built.”
