Reginox RL301CW 1.5 Bowl White Ceramic Fully Reversible Kitchen Sink & WasteAs a white 1.5 bowl kitchen sink, this model features a neutral finish that will coordinate will various kitchen design schemes. The extra half bowl is very beneficial, as it frees up counter space while you use it to defrost food, drain vegetables or soak dishes. Either bowl can be fitted with a waste disposal unit to help reduce food waste by 20%. Perfectly pristine, this white ceramic 1.5 bowl sink is designed to have a finger-tip smooth finish that will suit a variety of kitchen settings. Reversible, it is easily fitted around your interior needs.Key features:• Cabinet Size: 600mm• Bowl Size: 180mm x 330mm x 410mm• Sink Orientation - Fully ReversibleThe Reginox RL301CW ceramic kitchen sink is a durable and hardwearing washbasin that comes with a 10 Year Manufacturer Guarantee. Stainless steel bowl basket available for this sink - Click here Stainless steel drainer rack available for this sink - Click hereDimensionsMinimum Cabinet Size: 600mmHeight: 24cmWidth: 101cmDepth: 53cmMain Bowl Height: 180mmMain Bowl Width: 330mmMain Bowl Depth: 410mmSecond Bowl Height: 150mmSecond Bowl Width: 155mmSecond bowl depth: 285mmCeramic sinks are hand made in the traditional fashion,using the same craftmanship as 100 years ago and due to this processthe sizes may vary +/-2% from those shown and may not be exactly uniform.Product FeaturesStyle - ContemporaryTexture - GlossMade From - CeramicSuitable For Waste Disposal - YesSink Orientation - Fully ReversibleBowl Configuration - 1.5 bowl & drainerWaste Type - Basket strainer wasteContentsSinkPlastic PlumbingFittingsBasket Strainer WastesAdditional InformationThis sink can be fitted as left or right hand drainerThe tap hole will need to be punched through if requiredSuitable for use with 1 hole kitchen mixer tapsBridge taps are unsuitable with this sinkThe following items are not includedTapBasketsGuarantee - 10 Year Manufacturer GuaranteeFitting instructions for ceramic waste kits After taking the waste kit apart you need to put the white plastic chamber and the black rubber washer on the under side of the main bowl using a silicone sealant on the surface between the top of the rubber washer and the underside of the bowl. Also use silicone sealant on the under side of the metal flange going inside the bowl to provide a sufficient seal then using the centre bolt provided tighten it all up as tight as you can forcing any silicone sealant out and wipe the excess away. We also recommend you use some sealant on the overflow to prevent any leaking from here as well. Do the same procedure for the half bowl if you have purchased a 1.5 bowl sink. If you have a singel bowl just follow the instructions above. 
Visit Product Page